Failure Analysis of Set - Back Arming Process of MEMS S & A Device
نویسندگان
چکیده
Failure is one key problem of MEMS S&A (safety and arming) device for its practical application. To make research of failure of MEMS S&A device in action process, a method based on FTA was employed to make analysis on arming process of the set-back arming mechanism of typical MEMS S&A device. Result obtained with theory computation was verified to be right by simulation analysis and which could prove rationally of the method. Conclusion of the article could provide theory reference for structure designing and optimization of MEMS S&A device. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
Comprehensive Electromechanical Analysis of MEMS Variable Gap Capacitors
This paper presents a comprehensive case study on electro-mechanical analysis of MEMS[1] variable capacitors. Using the fundamental mechanical and electrical equations, static and dynamic behaviors of the device are studied. The analysis is done for three different modes, namely: dc (static mode), small signal ac and large signal regime. A complete set of equations defining dynamic behavior of ...
متن کاملParametric Study of the Centrifugal Insurance Mechanism in MEMS Safety and Arming Device
MEMS (Micro-electromechanical Systems) becomes important increasingly due to the smarter and smaller fuze used in OICW (Objective Individual Combat Weapon). MEMS Safety and Arming (S&A) device is employed in different platforms and regions for small caliber projectile. Therefore, it is necessary to make a parametric study of the MEMS S&A device in different apply environments and explore the ma...
متن کاملAccurate Determination of the Pull-in Voltage for MEMS Capacitive Microphone with Clamped Square Diaphragm
Accurate determination of the pull-in, or the collapse voltage is critical in the design process. In this paper an analytical method is presented that provides a more accurate determination of the pull-in voltage for MEMS capacitive devices with clamped square diaphragm. The method incorporates both the linearized modle of the electrostatic force and the nonlinear deflection model of a clamped ...
متن کاملتحلیل و طراحی تغییر دهنده فاز N - بیتی MEMS توزیع شده در باند Ka
Modern microwave and millimeter wave phased array antennas are attractive because of their ability to steer wave beams in space without physically moving the antenna element. A typical phased array antenna may have several thousand elements fed by a phase shifter for every antenna, which can steer the resulting array beam to different directions. Their low loss, low cost and lightweight phase s...
متن کاملFabrication and Characterization of a New MEMS Capacitive Microphone using Perforated Diaphragm
In this paper, a novel single-chip MEMS capacitive microphone is presented. The novelties of this method relies on the moveable aluminum (Al) diaphragm positioned over the backplate electrode, where the diaphragm includes a plurality of holes to allow the air in the gap between the electrode and diaphragm to escape and thus reduce acoustical damping in the microphone. Spin-on-glass (SOG) was us...
متن کامل