High-speed train pneumatic braking system with wheel-slide protection device : A modelling application from system design to HIL testing
نویسندگان
چکیده
Train pneumatic brakes are part of a train safety system, and are thus critical components. This paper illustrates how modeling can be applied to efficiently design such system, from requirement definition to HIL testing. The valves modeling is discussed along with the system level model. Moreover, in order to study the wheel-slide protection device, a model of the wheel-rail interface has been developed. The contact model, written in Modelica, has been validated against measurement for different conditions of contact (dry, wet...). The model is fully parametric and allows testing of various adherences. Finally, the resulting system composed of pneumatic valves, wheel-rail interface and rolling-stock is exported through c-code for integration into a HIL system, providing an efficient test platform for the electronic Brake Control Unit. High speed train; braking ; adherence; pneumatic
منابع مشابه
Development of a HIL railway roller rig model for the traction and braking testing activities under degraded adhesion conditions
The longitudinal train dynamics is controlled by traction and braking on board subsystems, such as Wheel Slide Protection (WSP) system and antiskid device. The integration and mutual interaction between the two systems are continuously increasing on high speed applications, especially when degraded adhesion conditions occur. Traditionally, braking and traction performances should be verified on...
متن کاملRegenerative Braking System for Series Hybrid Electric City Bus
*State Key Lab. of Automotive Energy and Safety Tsinghua University, Beijing, China 100084 Phone: 010-62771839 Regenerative Braking Systems (RBS) provide an efficient method to assist hybrid electric buses achieve better fuel economy while lowering exhaust emissions. This paper describes the design and testing of three regenerative braking systems, one of which is a series regenerative braking ...
متن کاملDevelopment and Simulation of an Hil Full-scale Test-rig to Study High Speed Train Dynamics under Degraded Adhesion Conditions
In this paper, an innovative Hardware In the Loop (HIL) architecture is presented to test braking on board subsystems on full-scale roller-rigs. The new approach is based on an innovative control strategy to reproduce a generic wheel-rail adhesion pattern on the roller-rig and particularly suitable for degraded adhesion conditions. The presented strategy is also implemented by the full-scale ro...
متن کاملStudy on Braking Panels in High Speed Trains Using CFD
With speed increasing in high-speed trains, due to limitations of other types of brakes, aerodynamic brake has become an important braking method. In this task to make better use of brake’s panel different configurations are examined and the best panel shape which provides the reasonable drag coefficient is introduced. The results of simulations are carried out with the computational fluid dyna...
متن کاملA Comprehensive Model for Adhesion Control System of Wheel and Rail
This paper presents the movement dynamic of the train and the relationship between the speed of wheel and train, as well as a discussion about the concept of wheel slip. There are two different operation regions designated as creep and wheelspin areas for wheel slip. Creep and wheelspin areas have stable and unstable characteristics, respectively. Wheels and rails are constructed from iron, and...
متن کامل