Novel Processing of Nanostructured Ceramics Using Microwaves
نویسنده
چکیده
منابع مشابه
Processing and Characterization of Nanocrystalline Mica Glass-Ceramics
In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...
متن کاملGelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملThe Spray Forming of Nanostructured Aluminum Oxide
Nanostructured ceramics and their composites possess improved properties such as tensile strength, fatigue strength, hardness, and wear resistance. Freestanding, near-net shape, nanostructured Al2O3 components can be synthesized via plasma-spray forming. In this study, plasma-spray parameters were optimized and an innovative substrate cooling technique was developed to retain nanosize Al2O3 in ...
متن کاملMicrowave Sintering, Brazing and Melting of Metallic Materials
Microwave energy has been in use for variety of applications for over 50 years. These applications include communication, food processing, wood drying, rubber vulcanization, medical therapy, polymers, etc. In the last two decades microwave heating has been also applied very effectively and efficiently to heat and sinter ceramic materials. Microwave heating is recognized for its various advantag...
متن کاملEvaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite
Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004