A Dynamometer Performing Dynamical Emulation of Loads with Non-Linear Friction
نویسندگان
چکیده
A dynamometer capable of emulating linear, nonlinear and discontinuous loads for rotating systems is described. The controllable load is produced by a servo drive system. Applications for the dynamometer are steady state load tests and dynamical load tests with linear, non-linear or discontinuous loads for testing of electrical machines in variable speed drive systems. The configuration of the dynamometer is presented, together with simulation models and simulation results. The simulated torque and speed time responses show that the dynamometer tracks the required torque with a high degree of accuracy, for both linear, non-linear and discontinuous loads.
منابع مشابه
Dynamic emulation of mechanical loads using a vector-controlled induction motor-generator set
This paper addresses the problem of electronic emulation of both linear and nonlinear mechanical loads using a vector-controlled induction machine dynamometer. It is shown that a basic emulation scheme where the dynamometer torque demand is derived from the inverse dynamics of the emulated load is not generally viable, especially if the emulated load is part of a closed-loop speed control syste...
متن کاملDynamic Emulation of Mechanical Loads – An Approach Based on Industrial Drives’ Features
Dynamic emulation of mechanical loads presents a modern and interesting approach for testing and validating performance of electrical drives without a real mechanical load included in the test rig. The paper presents an approach to dynamic emulation of mechanical loads when the load torque and inertia mass of emulated load can be significantly greater than that of laboratory test rig. Closed-lo...
متن کاملResponse Modification Factor of Chevron Braced Frame With Pall Friction Damper
Response modification factors (R-factor) are used in current seismic building codes to reduce earthquake forces associated with seismic design level to determine force levels. In recent years, many authors have shown great interest in the development of seismic structural systems and several theoretical and experimental studies have been conducted to investigate performance of dampers but littl...
متن کاملAnalysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method
Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...
متن کاملAnalysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method
Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...
متن کامل