Dual Band Circularly Polarized Modified Rectangular Patch Antenna for Wireless Communication
نویسندگان
چکیده
A dual band circularly polarized single-feed microstrip antenna for wireless communication systems is proposed here and its performance is tested in free space. This modified rectangular microstrip antenna having one protruded curved edge is simulated by using the IE3D simulation software. In between conducting patch and ground plane, designed antenna has two layers of glass epoxy FR-4 substrates separated by a thin layer of foam substrate. This designed antenna operates at two frequencies 3.10 GHz and 3.55 GHz and presents circularly polarized performance in far-field region. The measured impedance bandwidth of designed antenna is 26% (0.846 GHz) with respect to the central frequency 3.31 GHz. The axial ratio bandwidth at two frequencies 3.10 GHz and 3.55 GHz is close to 1.36% & 2.21% respectively. The measured E plane co and cross radiation patterns in entire impedance bandwidth are identical in shape and direction of maximum radiations is normal to patch geometry as the losses in cavity reduce as the quality factor of the cavity is decreased.
منابع مشابه
Design, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملAsymmetrical-fed RHCP Wide-Band Slot Element for X-Band applications
An outstanding square slot element, for x-band wireless applications with asymmetric coplanar waveguide fed (CPW) is proposed. Various shapes of metallic strips are utilized as grounded stubs for providing Right Hand Circular Polarization (RHCP) functionality and wide-band properties. By adjusting the proposed stubs and hook-shaped radiator, length and positions, wider impedance band width is o...
متن کاملDual-Band Circularly Polarized Antenna with Differential Feeding
A dual-band circularly polarized antenna is presented in this paper. A rectangular patch antenna with gap-feeding structure is firstly designed, and 3-dB axial-ratio bandwidth from 2.35 to 2.48GHz is obtained. A parasitic square ring is placed on the rear of the rectangular patch as a band-notch unit operating around 2.4 GHz. Then an original wide circularly polarized band is split into two ban...
متن کاملCircularly Polarized Circular Slot Antenna Array Using Sequentially Rotated Feed Network
This paper presents the design, simulation, and measurement of two low-cost broadband circularly polarized (CP) printed antennas: a single element and an array at C band. The proposed single element antenna is excited by an L-shaped strip with a tapered end, located along the circular-slot diagonal line in the back plane. From the array experimental results, the 3 dB axial ratio bandwidth can r...
متن کامل