Differentiation of Various Flaw Types in Ceramics Using the Scanning Laser Acoustic Microscope
نویسندگان
چکیده
High frequency acoustic imaging represents a powerful technique for the nondestructive evaluation of optically opaque materials. In this report the Scanning Laser Acoustic Microscope (SLAM) is used to detect and characterize flaws in ceramics. SLAM micrographs showing typical examples of cracks, laminar flaws, porosity and solid inclusions. are presented. The various flaw types are easily differentiated on the basis of their characteristic acoustic signatures. The importance of an imaging approach to the nondestructive evaluation of ceramics is demonstrated.
منابع مشابه
Similar Joining of NiTi Shape Memory Alloy using Nd:YAG Pulsed Laser Welding
In this research similar joining of NiTi shape memory alloy was studied. For this purpose, NiTi alloy in the form of wires with circular cross section possessing martensitic phase structure at room temperature was used. By utilizing Nd:YAG pulsed laser welding method followed by optimizing its technical parameters, a defectless joint in terms of appearance and metallurgical properties was obtai...
متن کاملFabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives
The Chalcogenide glasses were fabricated by melting and quenching techniques in the Se-Ge system at the presence of 1mol% Ga and 3, 5, and 7mol% Sn. Differential Scanning Calorimetry (DSC) analysis was conducted to extract the heat treatment of the samples. Fourier Transform Infrared (FTIR) spectroscopy analysis was also performed in a range of 2-16µm. The Glass samples were heat-treated at 450...
متن کاملبررسی اثر لیزر بر آمادهسازی سطح سرامیک زیرکونیا در استحکام باند برشی به عاج دندان
Background and Aims: Reliable bonding between tooth substrate and zirconia-based ceramic restorations is always of great importance. The laser might be useful for treatment of ceramic surfaces. The aim of the present study was to investigate the effect of laser irradiation on the shear bond strength of zirconia ceramic surface to dentin. Materials and Methods: In this experimental in vitro stu...
متن کامل1 Di - Silicate Dental Ceramic Surface Preparation by 2 1070 nm Fiber Laser : Thermal and Ultrastructural 3 Analysis 4
12 Background 13 Lithium di-silicate dental ceramics bonding, realized by using different resins, is strictly dependent 14 on micro-mechanical retention and chemical adhesion. The aim of this in vitro study was to 15 investigate the capability of a 1070 nm fiber laser for their surface treatment. 16 Methods 17 Samples were irradiated by a pulsed fiber laser at 1070 nm with different parameters ...
متن کاملDisilicate Dental Ceramic Surface Preparation by 1070 nm Fiber Laser: Thermal and Ultrastructural Analysis
Lithium disilicate dental ceramic bonding, realized by using different resins, is strictly dependent on micro-mechanical retention and chemical adhesion. The aim of this in vitro study was to investigate the capability of a 1070 nm fiber laser for their surface treatment. Samples were irradiated by a pulsed fiber laser at 1070 nm with different parameters (peak power of 5, 7.5 and 10 kW, repeti...
متن کامل