A cutting edge technology, or is it?

نویسنده

  • S B King
چکیده

Since the first days of angioplasty, restenosis has been the major limitation. Over the brief history of percutaneous interventions, therapies to prevent restenosis have come and gone with a frequency that rivals treatments for rheumatoid arthritis over the last hundred years. We have also learned to be skeptical regarding any claim of benefit from a therapy for established restenosis. In the recently published American Heart Association and the American College of Cardiology Guidelines on Percutaneous Coronary Interventions (1), there are no recommendations for any therapy for restenotic lesions that are not stented. However, since stenting has become the predominant percutaneous coronary artery intervention, the most common form of restenosis is currently in-stent restenosis. There is now an approved treatment for this condition— endovascular brachytherapy. Three randomized trials, two using beta radiation (START, INHIBIT) and one using gamma radiation (GAMMA-1), have shown significant reduction in re-restenosis of treated in-stent lesions that receive radiation therapy. Before brachytherapy can be delivered, mechanical removal or displacement of the obstructing lesion must be done. Also pertinent is the fact that

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool

One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...

متن کامل

Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool

One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...

متن کامل

An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces

An instantaneous rigid force model for prediction of cutting forces in ball-end milling of  sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...

متن کامل

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...

متن کامل

Strategic Cost-Cutting in Information Technology: toward a Framework for Enhancing the Business Value of IT

The increasing dependency of many businesses with information technology (IT)and the high percentage of the IT investment in all invested capital in businessenvironment ask for more attention to this important driver of business. Thelimitation of capital budget forces the managers to look for more wise investment inIT. There are many cost-cutting techniques in the literature and each of them ha...

متن کامل

شبیه‌سازی المان محدود فرایند برش متعامد و تعیین ضخامت لایه چسبنده به ابزار در ناحیه دوم برش

The built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. The built up layer (BUL) is formed in second deformation zone near the tool-chip interface in the back of the chip. This parameter influences the tool life and machined surface quality. This BUL should not be confused with the built up edge (BUE). The deformation of the BUL in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American College of Cardiology

دوره 38 3  شماره 

صفحات  -

تاریخ انتشار 2001