Occupancy Sites of Constituent Atoms and their Effects on the Martensitic Transformations in some Cu-Based and Ti-Ni-Based Ternary Alloys

نویسندگان

  • T. Tadaki
  • Y. Nakata
  • K. Shimizu
چکیده

Atomic configurations in P phase Cu-Al-Ni, Cu-Au-Zn and Cu-Zn-A1 ternary alloys before and after martensitic transformations, and occupancy sites of third elements X in the B2 parent lattice of Ti-Ni-X ternary alloys, where X = 3d elements, Pd and Au, have been investigated by means of an electron chanueling enhanced microanalysis method, called ALCHEMI. Large increases in M, and A, temperatures by several tens of K or more observed in the P phase alloys upon aging at ambient temperatures are attributed to ordering in the parent phase and to disordering in the martensite phase, respectively, both taking place between certain atoms occupying specific sites. The occupancy sites of third elements X in Ti-Ni-X alloys have been systematically examined, cllanging co~npositions in the following formulae: Ti0.5.xNi0.SXx, Ti0.5x12Ni0.5.x12Xx and Ti0.5Ni0.5.xXx. where x s: 0.05. While Fe, Co and Pd atoms occupy the Ni site preferentially, Sc atoms occupy the Ti site irrespective of composition, and the others the Ni and/or Ti site, depending on composition. These results for the Ti-Ni-X alloys are reasonably explained by a parameter D, which is defined by D = ( v ~ ~ V ~ ~ ~ ) / v ~ i ~ i , where Vi, is pairwise interaction hetweeu i aud j atoms. Decreases in h& temperature for the B2-B19' martensitic transformation are discussed in tenlls of a11 averagc number of valence electrons'at the specific sites in the parent lattice.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying

Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...

متن کامل

Martensitic transformation and shape memory effect in B2 intermetallic compounds of titanium

2014 Crystallographic and kinetic characteristics of martensitic transformations and parameters of shape memory effect in B2 compounds of titanium Ti50Ni50-xXx (X = Fe, Co, Pd, Pt, Au, Cu) and Ti50Pd50-xYx (Y = Fe, Co, Cu), where 0 ~ x ~ 50 are investigated. Temperature, hysteresis, value of reversible deformation and stress of martensitic shear for martensitic transformations and shape memory ...

متن کامل

Effect of the Primary Microstructures during Training Producers on TWSME in NiTi Alloys (TECHNICAL NOTE)

The influence of the martensitic, martensitic+austenitic and austenitic structures in bending training on two-way shape memory effect (TWSME) in Ni-50.8 at %Ti and Ni-49.9 at %Ti alloys was studied. In addition of the primary structure, the effect of pre-strain, plastic strain, training cycle and training temperature on the TWSME was investigated. The prepared samples were trained in martensiti...

متن کامل

Athermal and Isothermal Martensitic Transformations Induced at Room Temperature by Ultra High Magnetic Field

Effects of ultra high magnetic field of both pulse and steady types on martensitic transformation have been studied, using Fe-Ni-Mn, Fe-Ni-Mn-C alloys with the supplemental tests on Fe-Ni-C and Fe-NiCo-Ti alloys. It is found that the martensitic transformation is induced at room temperature not only athermally but also isothermally either by pulse magnetic field or by steady magnetic field for ...

متن کامل

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

In the case of medical implants, foreign materials are preferential sites for bacterial adhesion and microbial contamination, which can lead to the development of prosthetic infections. Commercially biomedical TiNi shape memory alloys are the most commonly used materials for permanent implants in contact with bone and dental, and the prevention of infections of TiNi biomedical shape memory allo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016