Electrochemically deposited organic luminescent films: the effects of deposition parameters on morphologies and luminescent efficiency of films.

The electropolymerization behaviors of an electroactive and luminescent compound TCPC as precursor are studied. The resultant electrochemical deposition (ED) films are characterized by cyclic voltammetry (CV), UV-vis, fluorescence spectra, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Under the CV mode with potential range of -0.5 to 0.85 V vs Ag/Ag(+), the coupling reactions between the carbazole units of TCPC are very efficient, while the fluorescent trifluorene segment in TCPC is chemically inert in this potential range, which results in a highly fluorescent film formation on indium tin oxide (ITO) electrode. The deposition parameters for preparing the TCPC-based ED films are optimized, and the best ED film gives the fluorescence efficiency of 45.5% with surface roughness of 2.8 nm and morphologic stability as heating to 180 degrees C. The light-emitting devices (LEDs) using this ED film as light emitting layer with structure ITO/ED film (approximately 100 nm)/Ba/Al achieve maximum luminescence and external quantum efficiency of 4224 cd/m(2) at 17 V and 0.72% at 11.5 V, respectively, which are better than the device using TCPC spin-coating films as emitting layer. The technique provides a facile route toward a patternable luminescent film and device because such luminescent ED films can be manipulatively deposited on the electrified electrode.