In Situ Inspection with Ultrasonic Creeping Wave for Rabbet of Turbine Blade
نویسندگان
چکیده
The properties of ultrasonic creeping wave were stated. Experimentations on the rabbet of aeroengine turbine blade were applied with ultrasonic creeping wave testing. The result indicates that the creeping testing method is feasible to inspect the rabbet of turbine blade in situ.
منابع مشابه
Single Crystal Turbine Blade Inspection Using a 2d Ultrasonic Array
In this paper a non-destructive method for inspecting jet-engine turbine blades for root cracking is developed. This method utilises 2D ultrasonic arrays to enable the detection and characterisation of sub-surface cracks in three-dimensions. The majority of modern turbine blades are manufactured from single crystals of nickel based superalloys which exhibit high elastic anisotropy. This complic...
متن کاملUltrasonic NDT of wind turbine blades using contact pulse-echo immersion testing with moving water container
Wind turbine blades are complicated objects for inspection because they have a curved surface, are multi-layered, have variable thickness and are made from anisotropic materials. Ultrasonic contact pulse-echo immersion testing with moving water container has been selected for inspection of wind turbine blades, because this type of the inspection can be performed having access just from the one ...
متن کاملUltrasonic Underwater Transmission of Composite Turbine Blade Structural Health
A health monitoring approach is investigated for hydrokinetic turbine blade applications. In-service monitoring is critical due to the difficult environment for blade inspection and the cost of inspection downtime. Composite blade designs provide a medium for embedding sensors into the blades for in-situ health monitoring. The major challenge with in-situ health monitoring is transmission of se...
متن کاملSampe Europe Conference & Exhibition Advanced Ultrasonic Ndt Techniques for Inspection of Wind Turbine Blades
This paper presents the development of inspection strategies dedicated to the quality insurance of the wind turbine blade manufacturing process and in particular the inspection of the adhesive bondlines. Ultrasonic testing is recognized as a technique that can provide valuable information about the structure. Porosity, dry area and delamination can be detected and characterized in laminates. La...
متن کاملAnalysis of the Fracture of a Turbine Blade
The cause of crack initiation turbine blade had initially cracked by a fatigue mechanism over a period of time and then fractured by the overload at the last moment. Experimental procedure consists of macroscopic inspection, material verification, microscopic examination, and metallographic analysis and finally FE. And for these procedures, some specimens were prepared from a fractured blade. Us...
متن کامل