Maurice Jaswon and boundary element methods
نویسنده
چکیده
In the direct boundary integral equation method, boundary-value problems are reduced to integral equations by an application of Green’s theorem to the unknown function and a fundamental solution (Green’s function). Discretization of the integral equation then leads to a boundary element method. This approach was pioneered by Jaswon and his students in the early 1960s. Jaswon’s work is reviewed together with his influence on later workers. & 2012 Elsevier Ltd. All rights reserved.
منابع مشابه
Integral equation methods in potential theory
This paper makes a short study of Fredholm integral equations related to potential theory and elasticity, with a view to preparing the ground for their exploitation in the numerical solution of difficult boundary-value problems. Attention is drawn to the advantages of Fredholm's first equation and of Green's boundary formula. The latter plays a fundamental and hitherto unrecognized role in the ...
متن کاملSimulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملModified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems
In this paper, a modification on the fixed grid finite element method is presented and used in the solution of 2D linear elastic problems. This method uses non-boundary-fitted meshes for the numerical solution of partial differential equations. Special techniques are required to apply boundary conditions on the intersection of domain boundaries and non-boundary-fitted elements. Hence, a new met...
متن کاملApplication of Decoupled Scaled Boundary Finite Element Method to Solve Eigenvalue Helmholtz Problems (Research Note)
A novel element with arbitrary domain shape by using decoupled scaled boundary finite element (DSBFEM) is proposed for eigenvalue analysis of 2D vibrating rods with different boundary conditions. Within the proposed element scheme, the mode shapes of vibrating rods with variable boundary conditions are modelled and results are plotted. All possible conditions for the rods ends are incorporated ...
متن کاملModified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems
In this paper, a modification on the fixed grid finite element method is presented and used in the solution of 2D linear elastic problems. This method uses non-boundary-fitted meshes for the numerical solution of partial differential equations. Special techniques are required to apply boundary conditions on the intersection of domain boundaries and non-boundary-fitted elements. Hence, a new met...
متن کامل