Multiscale Modeling of the Deformation of Semi-crystalline Polymers
نویسنده
چکیده
منابع مشابه
Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation
This paper deals with the calculation of the elastic properties for single-walled carbon nanotubes (SWCNTs) under axial deformation and hydrostatic pressure using the atomistic-based continuum approach and the deformation mapping technique. A hyperelastic model based on the higher-order Cauchy-Born (HCB) rule being applicable at finite strains and accounting for the chirality and material nonli...
متن کاملTemperature-related Cauchy–Born rule for multiscale modeling of crystalline solids
In this study, we develop a temperature-related Cauchy–Born (TCB) rule for multiscale modeling of crystalline solids based on the assumptions that deformation is locally homogeneous and atoms have the same local vibration mode. When employing the TCB rule in the nanoscale continuum approximation, the first Piola–Kirchhoff stress can be explicitly computed as the first derivative of the Helmholt...
متن کاملInvestigation of Vacancy Defects on the Young’s Modulus of Carbon Nanotube Reinforced Composites in Axial Direction via a Multiscale Modeling Approach
In this article, the influence of various vacancy defects on the Young’s modulus of carbon nanotube (CNT) - reinforcement polymer composite in the axial direction is investigated via a structural model in ANSYS software. Their high strength can be affected by the presence of defects in the nanotubes used as reinforcements in practical nanocomposites. Molecular structural mechanics (MSM)/finite ...
متن کاملFinite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملDeformation and Failure in Semi-Crystalline Polymer Systems
This study deals with the relation between the microstructure of semi-crystalline polymers and their intrinsic deformation and fracture behaviour. For this purpose, the deformation and failure of well-characterised PET, PE and PP samples have been investigated thoroughly. Compression tests on amorphous and cold crystallised PET showed that the strain hardening remained unchanged, despite the de...
متن کامل