Dynamic Analysis of Roller and Vane of Inverter Controlled Rotary Compressors

نویسنده

  • J. Wu
چکیده

This paper presents a complete dynamic analysis of roller and vane of a rotary compressor widely used for air-conditioners. An approach and a set of equations are developed estimating the type of motion at vane tip and roller interface and calculating the frictional force in accordance with the motion type. The forces on roller caused by relative motion between roller and cylinder wall are analyzed. The relative motion between vane tip and roller and the rotating velocity of roller of inverter rotary compressors and HFC41 OA rotary compressors are discussed in detail. The effect of secondary pressure pulse in compression chamber on the pursuing ability of vane as the compressors operate at high speed is shown.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Selection of Friction Materials Used in Compact, High Performance Inverter Controlled Rotary Compressors

T. IIZUKA and K. IKEDA Tochigi Works Hitachi, Ltd. Shimotsuga-gun, Tochigi-ken, Japan, 329-44 Since applications of rotary compressors driven by inverter motors have become more widespread, l~bricating problems with the sliding parts have been appearing. The sliding parts require sufficient antiseizure and wear-resistant properties under the boundary lubricating conditions. The authors have dev...

متن کامل

Vane Dynamics Analysis of a Tilted Vane Rotary Compressor

An analytical model of vane dynamics in a tilted vane rotary compressor is presented. With the geometric relationship of the vane in a tilted slot, and the roller, the kinetic equations were derived for evaluating the reciprocating inertial force of the vane, and the chamber volume equations were obtained for calculating pressure history inside the compression chamber. The empirical friction co...

متن کامل

Investigation of a Variable Rotary Compressor Using a Vane Control Method

It is well known that the compressor with variable capacities has a higher efficiency than the typical single capacity compressors for the air-conditioner system. Therefore, many compressor makers are trying to develop variable types of capacity-controlling compressors, one of which is a vane locking controlled rotary compressor. This paper investigates the rotary compressor using a vane contro...

متن کامل

A Mathematical Model for Internal Leakage in a Rotary Compressor

The internal leakage has a great effect on the performance of a rotary compressor. In this paper a leakage model as a part of a complete simulation model is developed. The leakage model analyzes the oil/refrigerant mixture leakage flow through the roller radial clearance caused by the motion of roller relative to cylinder wall and the pressure difference and considers the effect of the motion o...

متن کامل

Evaluation of Composite Vane Materials for Rotary Sliding Vane Compressors

The physical performance characteristics of composite materials used for vanes in rotary, sliding-vane compressors, in general, are several orders of magnitude more difficult to quantify for design purposes than most homogeneous materials. This arises from the numerous variables that influence the response of these materials under the severe environmental conditions existing in such compressors...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014