Modeling and Control of Co-Surge in Bi-Turbo Engines
نویسندگان
چکیده
To avoid co-surge the mass flows should be kept balanced. Still co-surge can occur when operating close to the surge line due to disturbances between the two mass flows. In that case the control system needs to detect the co-surge oscillation and take proper actions. The simulation model is used to evaluate detection and control algorithms, which are then tested in vehicle. −0.25 0 0.25 0.5 0.75 1 1.25 1.5 1.75 −20 0 20 40 60 80 100
منابع مشابه
Co-Surge Detection and Control for Bi-Turbo Engines with Experimental Evaluation
A V-type engine with a bi-turbocharger configuration utilizes the exhaust energy well which gives a fast torque response. An unwanted instability, called co-surge, can occur in such engines where the two interconnected compressors alternately go into flow reversals. If cosurge occurs, the control system must quell the oscillations with as little disturbance in engine torque as possible. A model...
متن کاملModeling and control of actuators and co-surge in turbocharged engines
The torque response of the engine is important for the driving experience of a vehicle. In spark ignited engines, torque is proportional to the air flow into the cylinders. Controlling torque therefore implies controlling air flow. In modern turbocharged engines, the driver commands are interpreted by an electronic control unit that controls the engine through electromechanical and pneumatic ac...
متن کاملEffects of Pulsating Flow on Mass Flow Balance and Surge Margin in Parallel Turbocharged Engines
The paper extends a mean value model of a parallel turbocharged internal combustion engine with a crank angle resolved cylinder model. The result is a 0D engine model that includes the pulsating flow from the intake and exhaust valves. The model captures variations in turbo speed and pressure, and therefore variations in the compressor operating point, during an engine cycle. The model is used ...
متن کاملImproved Turbine Engine Hierarchical Modeling and Simulation Based on Engine Fuel Control System
Aircraft engines constitute a complex system, requiring adequate mon-itoring to ensure flight safety and timely maintenance. The best way to achieve this, is modeling the engine. Therefore, in this paper, a suitable mathematical model from engine controller design point of view, for a specific aero turbine engine is proposed by the aid of MATLAB/Simulink software. The model is capable of reduc...
متن کاملCooled EGR for a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption
Cooled exhaust gas recirculation is emerging as a promising technology to address the increasing demand for fuel economy without compromising performance in turbocharged spark injection engines. The objectives of this study are to quantify the increase in knock resistance and to decrease the enrichment and emission at high load. For this purpose four stroke turbo charged Spark Ignition engine (...
متن کامل