Specified Domain in Nu-Mu Interaction Diagram for Logical Judgment in Numerical Analysis on Compression Reinforced Concrete Members
نویسندگان
چکیده
A series of specified domains in Nu-Mu interaction diagram are proposed to determine optimal reinforcement schemes for rectangular RC column sections subjected to uniaxial eccentric load. These domains divide the area covered by interaction diagram into four regions of safety zone, compression-controlled zone, balanced failure zone and tensioncontrolled zone, which can help engineer to understand all possibilities of section failure under varied reinforcement scheme when they carried out a section design for columns with numerical analysis. With the physical information included in the diagram, the domains help to establish logical judgment between practical reinforcement schemes specified by the Chinese code (GB50010-2010) and corresponding load combination (Nu, Mu) in interaction diagram, and also provide physical interpretation on any calculated result of steel consumption.
منابع مشابه
A New Approach for Numerical Analysis of the RC Shear Walls Based on Timoshenko Beam Theory Combined with Bar-Concrete Interaction
In this paper, a new approach for nonlinear numerical modelling of the reinforced concrete shear walls with consideration of bar-concrete interaction and shear deformation is proposed. Bar and concrete stress-strain relations, the bar-concrete interaction, the shear stress-strain relation and, also, their cyclic behavior including the strength degradation and stiffness degradation are adopted a...
متن کاملFailure Surface for L - Shaped Reinforced
Title of Thesis: Failure Surface for L-shaped Reinforced Concrete Short Columns Mon-Chen Liu, Master of Science in Civil Engineering, 1983 Thesis directed by: Dr, C.T. Thomas Hsu Assistant Professor Department of Civil and Environmental Engineering Combined bending and axial compression for L-shaped reinforced concrete short columns is a common problem. But the present ACI Building Code (ACI 31...
متن کاملNumerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملNumerical Study on the Flexural Behaviour of Concrete Beams Reinforced by GFRP Bars
Enhancement of the response of reinforced concrete (RC) beams using fiber-reinforced polymer (FRP) reinforcement bars has become a popular structural technique over the past two decades due to the well-known advantages of FRP composites including their high strength-to-weight ratio and excellent corrosion resistance. Thisstudy presents n...
متن کامل