Initial Jet Before the Onset of Effective Electrospinning of Polymeric Nanofibers

Initial jet usually has a large primary droplet hanging at flying end before the onset of effective electrospinning. The primary droplet is undesired as its diameter is several orders of magnitude higher than that of electrospun nanofibres. A new method is used to derive micro-scaled initial jet and fine primary droplet under applied small-aperture needle by utilizing low solution flow rate and pre-applied electric potential before the extrusion of polymeric solution out of the needle. Small-aperture needle reduces the base of conical pendant, while low solution flow rate prevents a fluidic inrush into conical pendant. The pre-applied electric potential preforms a miniature liquid cone, as an origin of initial jet, within the needle. The conic preformation reduces the formation time of Taylor cone in order to escape from a swollen Taylor cone under a continuous inflow of polymeric solution. The miniature conical pendant grows so acute that it emits fine primary droplet rapidly from its tip with accumulated ions. Carrying primary droplet, thin initial jet experiences axial elongation and circumferential rotation in the space.