Misfit profile of dental bridges.

نویسندگان

  • Silvina Cattáneo
  • Mariela Alvarez Castro
  • José M Alvarez Castro
  • Elvio Troielli
  • Carlos A Gassó
  • Héctor Alvarez Cantoni
چکیده

Clinical evidence has shown that dental bridge (DB) misfit is more frequent than individual crown restoration misfit, and that it causes restorative failures. A comparative study of misfit profiles was performed for the most common clinical situations in mouth rehabilitation procedures with fixed restorations: gold-cast DB and porcelain metal alloy DB. Evidence from this study may lead dentists to consider the advantages and weaknesses of one structure type over the other. The results obtained showed two different profiles, with the porcelain metal alloy (PMA) DB being less predictable than the gold-cast DB. The posterior abutment restoration tends to come apart distally from the tooth structure and get closer to the mesial aspect, while keeping distal-medial separation with respect to the anterior abutment. The gold-cast DBs showed a separation pattern in which the distal end comes away from the molar and the medial end from the premolar, getting clearly closer to the faces next to the pontic: its distal aspect gets closer to the premolar and mesially to the molar The study has also shown that even though the adaptive patterns are different, is less in PMA than in gold alloys, the latter being used only in a small percentage of clinical indications in oral rehabilitation, mainly due to aesthetic demands and high costs. The impact of this research in clinical dentistry is that PMA DBs have shown worst marginal adaptation areas where clinically, there is lack of vision or inaccessibility for appropriate dental preparation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Bridge Orientation in Casting Machine on the Castability and Quality of Base Metal Castings

Introduction: The aim of this study was to evaluate the effect of bridge orientation in casting machine on castability and quality of base metal castings. Methods: Three groups of patterns with different direction and lengths in casting machine were casted and then studied qualitatively and quantitatively using mean and standard deviation in table of frequency. Results: Larger nodules and poros...

متن کامل

Stress analysis of all-ceramic three-unit dental bridges ‌using finite element method

Stress analysis of all-ceramic three-unit dental bridges ‌using finite element method M.F. Biria *- Dr. F. Farahmand** - Dr. Gh. Eslami Amirabadi*** *- M.S in Biomechanics Engineering Faculty of Mechanics. Sharif Industrial University. ** - Associate professor of Mecanical Engineering Dept. Sharif Industrial University. *** - Assistant professor of Orthodontics Dept. Faculty of Dentistry Shahed...

متن کامل

Effect of technique and impression material on the vertical misfit of a screw-retained, three-unit implant bridge: An in vitro study

INTRODUCTION A dental impression is a negative imprint of an oral structure that can be used to produce a positive cast of a patient's teeth as a permanent record. The accuracy of the impression affects the accuracy of the cast, and a precise impression is needed in order to create prosthesis with optimal fitting. Minimization of misfit is an important aim in prosthesis science and dental impla...

متن کامل

Relation between implant/abutment vertical misfit and torque loss of abutment screws.

This study investigated whether there is a direct correlation between the level of vertical misfit at the abutment/implant interface and torque losses (detorque) in abutment screws. A work model was obtained from a metal matrix with five 3.75 x 9 mm external hex implants with standard platform (4.1 mm). Four frameworks were waxed using UCLA type abutments and one-piece cast in commercially pure...

متن کامل

The survival rate of fiber-reinforced composite inlay bridges after two million load cycles: An in vitro study

The survival rate of fiber-reinforced composite inlay bridges after two million load cycles: An in vitro study Dr. F. Darabi* - Dr. A. Mirfazaelian** - Dr. H. Naseri*** *Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry – Guilan University of Medical Sciences. **Assistant Professor of Removable Prosthodontics Dept. Faculty of Dentistry – Tehran University of Medical Scienc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Acta odontologica latinoamericana : AOL

دوره 25 1  شماره 

صفحات  -

تاریخ انتشار 2012