Effect of Er:YAG laser irradiations on shear bond strength of three self-adhesive resin cements to dentin.

نویسندگان

  • Nuray Capa
  • Arzu Aykor
  • Emre Ozel
  • Senih Calikkocaoglu
  • Mubin Soyman
چکیده

OBJECTIVE The purpose of this study was to evaluate the influence of Er:YAG laser irradiation on shear-bond strength of self-adhesive resin cements to dentin. BACKGROUND DATA Different laser-irradiation settings are used for dentin-surface pretreatment, which may affect the bond strength of resins. METHODS Fourty-five extracted third molars were selected, sectioned in a mesiodistal direction, and 90 tooth slabs were obtained. The teeth were ground to expose the dentinal hard tissue with 320- and 600-grit silicon carbide disks. The specimens were randomly assigned to nine groups (n = 10). Surfaces for each group were laser irradiated with 30 Hz/70 mJ (2.1 W), 30 Hz/160 mJ (4.8 W), or non-irradiated (control) for each resin cement (SmartCem2, RelyX Unicem, Multilink Automix). All specimens were stored in distilled water at 37°C for 24 h after luting. Shear-bond testing was carried out by using a Universal testing machine with a crosshead speed of 0.5 mm/min. Data were analyzed with one-way ANOVA and post hoc Tukey HSD tests (p < 0.05). RESULTS The highest bond-strength value was obtained with SmartCem2, which was irradiated with Er:YAG laser (30 Hz/160 mJ). The lowest values were exhibited in the control group of SmartCem2, RelyX Unicem and Multilink Automix, respectively (4.92 ± 1.68, 7.17 ± 2.88, and 7.93 ± 3.05). CONCLUSION The 2.1-W and 4.8-W laser ablation did not show any statistically difference for RelyX Unicem and Multilink Automix materials. However, in the SmartCem2 group, laser irradiated with 30 Hz/160 mJ application increased the bond-strength values, and the highest bond-strength results were obtained in this group.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Shear Bond Strength of Nanocomposites to Dentin Substrate Treated with Er:YAG Laser Followed by Two Different Bonding Systems

Background and Aim: Preparation of tooth structure by laser systems produces a surface with different characteristics. Therefore, selecting an appropriate bonding system is necessary to achieve the maximum bond strength. The aim of this study was to compare the bond strength of Adper Single Bond 2 adhesive and Single Bond Univer-sal to dentin prepared by bur or laser. Materials and Methods: ...

متن کامل

Effect of glycine pretreatment on the shear bond strength of a CAD/CAM resin nano ceramic material to dentin.

BACKGROUND The purpose of this study was to evaluate the effect of glycine pretreatment on the shear bond strength between dentin and a CAD/CAM resin nano ceramic material (LavaTM Ultimate Restorative), bonded together with adhesive cements using three different luting protocols (total-etch; self-etch; self-adhesive). MATERIAL AND METHODS Thirty cylinders were milled from resin nano ceramic b...

متن کامل

بررسی آزمایشگاهی استحکام باند طولانی مدت دو نوع سمان رزینی به مینا و عاج دندان

  Background and Aims : In this in vitro study, the long-term bond strength of a self-adhesive resin cement and conventional resin cements to human enamel and dentin was compared .   Materials and Methods: 80 sections of intact human third molars were randomly assigned into eight groups according to the cement type [Rely X Unicem (RXU), Rely X ARC (RXA)], bond substrate (enamel, dentin) and the...

متن کامل

Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics

PURPOSE The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. MATERIALS AND METHODS In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and ...

متن کامل

Dentin deproteinization effect on bond strength of self-adhesive resin cements.

This study examined the effect of deproteinization on the bond strength between self-adhesive resin cements and dentin surfaces that were untreated (control), acid-etched, or acid-etched and subjected to a post-etch deproteinization treatment. Cylinders of RelyX Unicem or BisCem (n = 6) cement were build-up on the dentin surfaces and tested to determine shear strength. The results were analyzed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Photomedicine and laser surgery

دوره 28 6  شماره 

صفحات  -

تاریخ انتشار 2010