Synthesis and Characterization of Carbon Nitride Films for Micro Humidity Sensors

نویسنده

  • Sung Pil Lee
چکیده

Nano-structured carbon nitride (CNx) films were synthesized by a reactive RFmagnetron sputtering system with a DC bias under various deposition conditions, and theirphysical and electrical properties were investigated with a view to using them for microhumidity sensors. The FTIR spectra of the deposited films showed a C=N stretching bandin the range of 1600~1700 ㎝⁻1, depending on the amount of nitrogen incorporation. Thecarbon nitride films deposited on the Si substrate had a nano-structured surfacemorphology with a grain size of about 20 nm, and their deposition rate was 1.5 μm/hr. Thesynthesized films had a high electrical resistivity in the range of 10⁸ to 10⁸ ω·cm,depending on the deposition conditions. The micro humidity sensors showed a goodlinearity and low hysteresis between 5 ~ 95 %RH.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication and Characterization of Polymer Blend Doped With Metal Carbide Nanoparticles for Humidity Sensors

Nanocomposites films of (polymer blend-ceramics) were prepared from (PVA-PAA) blend and (PVA-PAA) blend doped with niobium carbide nanoparticles for humidity sensors have low cost, easy fabrication, high sensitivity, lightweight and high corrosion resistance. The structural, electrical and optical properties of (PVA-PAA-NbC) nanocomposites have been studied. The D.C electrical properties of (PV...

متن کامل

Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4

In this study, a novel solid dendrimer amine (hyperbranched polymers) was prepared using mesoporous carbon nitride functionalized by melamine based dendrimer amines. This adsorbent was denoted MDA-MCN-1. The process was stepwise synthesis and hard-templating method using mesoporous silica SBA-15 as a template. Cyanuric chloride and N,N-diisopropylethylamine (DIPEA, Merck) were used for function...

متن کامل

Preparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices

In this work, aluminum nitride (AlN) thin films with different thicknesses were deposited on quartz and  silicon  substrates  using  single  ion  beam  sputtering  technique.  The  physical  and  chemical properties  of  prepared  films  were  investigated  by  different  characterization  technique.  X-ray diffraction (XRD) spectra revealed that all of the deposited films have an amorphous str...

متن کامل

Deposition and characterization of silicon carbon nitride films prepared by RF-PECVD with capacitive coupling

The goals of this work were to synthesize stoichiometric silicon carbon nitride (Si1.5C1.5N4) films using the RF-PECVD method and to characterize the deposited material. Gas mixtures, as opposed to an organic monomer, were chosen for reactants. Gas mixtures allow for varying the concentration of the elements needed for silicon carbon nitride synthesis and thereby optimizing the composition of t...

متن کامل

Laser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film

Laser micro-Raman spectroscopy is an ideal tool for assessment and characterization of various types of carbon-based materials. Due to its special optical properties (CrN) coated stainless steel substrates. NCD films have been investigated by laser micro-Raman spectroscopy. The fingerprint of diamond based materials is in the spectral region of 1000-1600 cm-1 in the first order of Raman scatter...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 8  شماره 

صفحات  -

تاریخ انتشار 2008