Finite element analysis of fastening and joining: A bibliography (1990–2002)
نویسنده
چکیده
The paper gives a bibliographical review of finite element methods applied for the analysis of fastening and joining from the theoretical as well as practical points of view. The bibliography at the end of the paper contains 726 references to papers and conference proceedings on the subject that were published between 1990 and 2002. These are classified in the following categories: pin joints; thread connections; bolted joints, screws, nuts; rivets; fittings; tubular joints; expansion joints; gaskets; and other types of fastening. q 2003 Elsevier Science Ltd. All rights reserved.
منابع مشابه
PARAMETRIC STUDY ON RAILWAY FASTENING SYSTEM RESPONSE SUBJECTED TO DIFFERENT AXLE LOAD
There are several factors causing fastening systems to deteriorate faster than the designed life. The high repetitive loads from a moving train being one of the main factors, track irregularities, design and installation defects of track components, non-uniform rail support stiffness, unevenness in the rail seat deterioration are some of the factors causing fastenings systems to deteriorate fas...
متن کاملLaser Joining of Continuous Glass Fiber Composite Pre-forms
A laser fusion joining method is investigated for the purpose of through thickness strengthening of fiber pre-forms used in the vacuum infusion fabrication of thick composite structures. Laser joining is achieved without filler materials to replace adhesives, pins or stitches used in conventional composite fabrication. A two step joining process is developed to fuse fibers within a single bundl...
متن کاملExperimental and Numerical Investigation of Laser Assisted PC to Polycarbonate Welding
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
متن کاملFailure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...
متن کامل