Resistive states in strontium titanate thin films: Bias effects and mechanisms at high and low temperature
نویسندگان
چکیده
A study on charge transport properties of thin film Fe-doped SrTiO3 epitaxially grown on Nb-doped SrTiO3 is reported. Electric measurements between 350 °C and 750 °C show a transition from predominant ionic to electronic conduction and lower conductivity of the thin films compared to the bulk of polycrystalline samples. Defect chemical changes at elevated temperature were investigated by applying a bias voltage. A model is described which successfully predicts additional features such as inductive loops or extra semicircles measureable by impedance spectroscopy as well as the complicated time dependence of electric DC-measurements. With this model it is also possible to calculate the negligibly small ionic conductivity next to the dominating electronic conductivity in the high temperature regime. The ionic conductivity is referenced by oxygen isotope depth profiling. Changes of resistive states in Fe-doped SrTiO3 thin films at high temperature and moderate fields are compared to room temperature resistive switching phenomena at high electric fields. A conductive filament based switching process is observed at room temperature, and the capability for forming such filaments and their electric properties is further analysed using microelectrodes.
منابع مشابه
Effects of Electrodes on the Switching Behavior of Strontium Titanate Nickelate Resistive Random Access Memory
Strontium titanate nickelate (STN) thin films on indium tin oxide (ITO)/glass substrate were synthesized using the sol-gel method for resistive random access memory (RRAM) applications. Aluminum (Al), titanium (Ti), tungsten (W), gold (Au) and platinum (Pt) were used as top electrodes in the STN-based RRAM to probe the switching behavior. The bipolar resistive switching behavior of the set and ...
متن کاملتأثیر فرایند سینتر بر خواص الکتریکی و ریزساختاری تارگت کندوپاش و لایهی نازک باریوم استرانسیوم تیتانات
In this study the effect of sintering parameters on the microstructure and electrical properties of the barium strontium titanate sputtering target is investigated. For optimizing the sintering temperature, BST compacts sintered at various temperatures ranging from 1200 to 1400 ºC for 2 hours. The sintered Barium Strontium Titanate sputtering target comprising with a high density, purity and a ...
متن کاملHigh tunability in compositionally graded epitaxial barium strontium titanate thin films by pulsed-laser deposition
Compositionally graded barium strontium titanate @(BaxSr12x)TiO3—BST, x50.75, 0.8, 0.9, and 1.0# thin films are fabricated by pulsed-laser deposition on a LaAlO3 substrate with (La0.7Sr0.3)MnO3 as the bottom electrode. A high dielectric permittivity and temperature characteristic without Curie–Weiss law are obtained. A tunability of over 70% is obtained at frequency of 1 MHz, which is higher th...
متن کاملInvestigation of resistive switching in anodized titanium dioxide thin films
In this work, TiO2 nanostructures were grown on titanium thin films by electrochemical anodizing method. The bipolar resistive switching effect has been observed in Pt/TiO2/Ti device. Resistive switching characteristics indicated the TiO2 nanotubes are one of the potential materials for nonvolatile memory applications. Increasing anodizing duration will increase nanotube lengths which itself c...
متن کاملساخت و بررسی نمونههای حجمی و لایه نازک فریت استرانسیوم
In this article, bulk and thin film samples of strontium ferrite have been studied. Due to the high electrical resistivity in strontium ferrite, energy loss due to eddy currents reduces and because of this, it can be used in high frequency magnetic circuits. On the other hand, strontium ferrite has attracted much attention as a permanent magnet. At first, we study the preparation process of b...
متن کامل