Genetic algorithm for rigid body reconstruction after micro-Doppler removal in the radar imaging analysis

Recently, an L-statistics based method for the micro-Doppler effects removal has been proposed by the authors. Order statistics is performed on the spectrogram, while the rigid body signal synthesis is done by using the remaining STFT samples, after microDoppler removal. By the proposed method, the Fourier transform is recovered with a concentration close to the original one. However, during the procedure of the microDoppler removal, the STFT samples that correspond to the rigid body are retracted, as well. Consequently, in the reconstructed Fourier transform of the rigid body, we get one very highly concentrated pulse, as in the original Fourier transform, and a number of low-concentrated components, being spread around the peak. These low concentrated components are summed up by different random phases. In this paper, we propose a genetic algorithm for the estimation of the removed STFT samples corresponding to the rigid body. Each individual in the genetic algorithm contains possible estimation of the phases of the missing STFT samples, whereas fitness function forces individuals (combination of phases) for which a minimal energy of the side lobs is obtained. The individual with the highest fitness is considered as the final phases’ estimation of the missing STFT values, and then used for the reconstruction of the original Fourier transform. The amplitude of a STFT sample is estimated as median of the amplitudes of the remaining samples at the same frequency. Performance of the proposed genetic algorithm is illustrated by examples. & 2013 Elsevier B.V. All rights reserved.