Thermal analysis during partial carbonizing process of rhubarb, moutan and burnet

نویسندگان

  • Junnan Ma
  • Xianglong Meng
  • Xiaohui Guo
  • Yaru Lan
  • Shuosheng Zhang
چکیده

Control of temperature and duration of partial carbonization for Chinese medicines have been mainly based on experience of the processors. No quantitative methods and parameters are available that can be used to precisely control the temperature and determine the energy changes during the process. In our research, with a simulated atmosphere air condition, the partial carbonization processes of three Chinese herb medicines rhubarb, moutan and burnet were simulated at different heating rates (5, 10 and 20°C • min-1) and analyzed by thermal gravimetric analysis (TGA) to quantify the upper limits of the temperature. The activation energy was calculated with Friedman, Kissinger-Akahira-Sunose (KAS) method and Ozawa-Flynn-Wall (OFW) methods in iso-conversional models and independent parallel reaction model (IPR). The upper temperatures were calculated to be 280, 184 and 246°C for rhubarb, moutan and burnet, respectively, at corresponding conversion rates of 0.4, 0.2 and 0.1. Calculation of the activation energy has been found impossible with the IPR model. Results obtained from the three iso-conversional methods were different. For rhubarb and burnet, the conversion rates at the upper temperature limits were at the highest or second highest activation energy, while for moutan, it was at the lowest value of activation energy. These results confirmed scientific rationales of traditional Chinese medicine theory that rhubarb and burnet be prepared at high temperature and moutan be prepared at medium temperature. Application of thermal analysis techniques would broaden and deepen traditional Chinese medicine research, and are applicable to the processing of medicinal materials including traditional Chinese medicines. Results obtained from the study could provide new ideas and methods for research to modernize the preparation of traditional Chinese medicines.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating the Germination Characteristics of Poterium sanguisorba Seeds under the Influence of Thermal Treatments for Pasture Establishment

Common burnet (Poterium sanguisorba) is a perennial herb from rose family (Rosaceae) which is used to construct pastures. The studied plant can resist against freezing, cool and drought. The present study was conducted to study the seed germination parameters of common burnet in different thermal treatments as completely randomized design in 4 replications in 2013. Treatments involved the effec...

متن کامل

Solidification and thermal performance analysis of the low carbon steel during the continuous casting process

The present paper evaluates the effect of the nozzle characteristics on the heat transfer and phase change of the low carbon steel during the continuous casting process. A three-dimensional energy equation and a solidification model are used to drive the governing equation of the phase change and temperature distribution. A linear relation is obtained to predict the temperature-dependent of the...

متن کامل

Thermal-oxidative Degradation of PGA, PLLA, and Random Binary PLLA-PGA Copolymers

Dimerization process is essential for producing copolymers. The features of dimerization process like thermal-oxidative degradation should be well known to reach maximum efficiency and a superior reactor design. Also, the degradation mechanism of biodegradable polymers is important during sterilization processes. Thermal-oxidative degradation of PGA, PLLA, and their binary copolymers was invest...

متن کامل

Optimization of thermal curing cycle for a large epoxy model

Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...

متن کامل

Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE)

In this work, the effect of carbon dioxide partial pressure on the calcination kinetics of high purity zinc carbonate hydroxide has been studied. Non-isothermal analysis has been performed on samples at different CO2 partial pressures by TGA and DTA. It has been found that the calcination behaviour of this material corresponds to the shrinking core model and the reaction mechanism is phase boun...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 12  شماره 

صفحات  -

تاریخ انتشار 2017