In Situ IonicÕElectric Conductivity Measurement of La0.55Li0.35TiO3 Ceramic at Different Li Insertion Levels

نویسندگان

  • Chunsheng Wang
  • Prashanth Patil
  • A. John Appleby
  • Frank. E. Little
  • Mehmet Kesmez
  • David L. Cocke
چکیده

In Situ IonicÕElectric Conductivity Measurement of La0.55Li0.35TiO3 Ceramic at Different Li Insertion Levels Chunsheng Wang,* Prashanth Patil, A. John Appleby,* Frank. E. Little, Mehmet Kesmez, and David L. Cocke* Center for Manufacturing Research and Department of Chemical Engineering, Tennessee Technological University, Cookeville, Tennessee 38505, USA Gill Chair Group of Chemistry and Chemical Engineering, Fuel Cell and Energy System Center, Lamar University, Beaumont, Texas 77710, USA Center for Electrochemical Systems and Hydrogen Research, Texas Engineering Experiment Station, Texas A&M University, College Station, Texas 77843-3402, USA Center for Space Power, Texas Engineering Experiment Station, Texas A&M University, College Station, Texas 77843-3118, USA

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Solvent-Free Composite PEO-Ceramic FiberÕMat Electrolytes for Lithium Secondary Cells

Solvent-free composite poly~ethylene oxide! ~PEO!-ceramic fiber or mat electrolytes with high ionic conductivity and good interfacial stability have been developed using high-ionic-conductivity La0.55Li0.35TiO3 fibers and mats. The conducting ceramic fibers can penetrate the cross section of the electrolyte film to provide long-range lithium-ion transfer channels, thus producing composite elect...

متن کامل

Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure

A conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using differential scanning calorimetry (DSC), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and AC impedance techniqu...

متن کامل

Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams

In this study, theoretical investigations of Li2MSiO4 family cathode materials, including Li2MnSiO4, Li2FeSiO4, Li2CoSiO4, and Li2NiSiO4 are performed using density functional theory (DFT), by GGA and GGA+U methods. The materials properties including electrical conductivity and rate cap...

متن کامل

High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide).

High ionic conductivity solid polymer electrolyte (SPE) has long been desired for the next generation high energy and safe rechargeable lithium batteries. Among all of the SPEs, composite polymer electrolyte (CPE) with ceramic fillers has garnered great interest due to the enhancement of ionic conductivity. However, the high degree of polymer crystallinity, agglomeration of ceramic fillers, and...

متن کامل

In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis

In this research, using pyrolysis of phenolic resin in the presence of silicon particles, the SiC ceramic composite is formed. The samples were prepared by introducing 30, 35, 40, 45 and 50 wt% of Si particles to the phenolic resin. The samples were cured at 180°C then carbonized at 1100°C. The final carbonized C/Si composites are hot-pressed at 1500°C in inert atmosphere, which is more than th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004