Removal of unburned carbon from municipal solid waste fly ash by column flotation.
نویسندگان
چکیده
Unburned carbon (UC) is the major source of organic contaminants in municipal solid waste (MSW) fly ash. So most organic contaminants can be removed by the removal of the UC from the MSW fly ash. In this paper, we first used a technique of column flotation to remove UC from MSW fly ash. The influences of column flotation parameters on the recovery efficiency of UC were systematically studied. It was found that the UC recovery efficiency was greatly influenced by the gas flow rate, pH value, collector kerosene's concentration and the types of fly ash. By optimizing the above parameters, we have successfully removed 61.2% of the UC from MSW fly ash having 5.24% UC content. The removal mechanism was well accounted for the kinetic theory of column flotation and surface-chemistry theory. The results indicate that the column flotation technique is effective in removing the UC from MSW fly ash, and show that there is a strong possibility for practical application of this technique in removing the organic contaminants from MSW fly ash.
منابع مشابه
Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash
Two common waste materials, red mud and fly ash, were used to produce a new nano-hybrid adsorbent by heat treatment with alkali addition. The new zeolitic structure formation of the hybrid adsorbent was revealed using the BET surface area, XRD, and SEM analyses. This hybrid adsorbent was utilized to remove arsenic from synthetic and real waste waters by batch and column adsorption experiments. ...
متن کاملSimultaneous Ash and Sulphur Removal from Bitumen Using Column Flotation Technique: Experiments, RSM Modeling and Optimization
An efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. The bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. The Box-Behnken Design (BBD) was employed to design the experiments, to ...
متن کاملLeaching behaviour of elements and evaluation of pre-treatment methods for municipal solid waste incinerator residues in column leaching tests.
Two new pre-treatment methods (water-washing/carbonation and carbonation/phosphate stabilization) of municipal solid waste (MSW) incinerator residues were evaluated by column leaching tests under aerobic conditions and anaerobic conditions (which were changed to aerobic conditions after 10 months). A mixture of bottom ash and fly ash (5:1 ratio) was pre-treated using each method. Shredded incom...
متن کاملA Study on removal of chromium from tannery effluent treatment of chrome tanning waste water using tannery solid waste
This study illustrates the process of removal of chromium from chrome tanning waste-water by fly ash which was drive from chrome shaving dust. This experiment was carried out in a batch process with laboratory prepared adsorbent samples and chrome tanning water collected from local tanneries. The influence of various factors likes adsorbent doses, contact time, and initial concentration of chro...
متن کاملAsh and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling
This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Waste management
دوره 23 4 شماره
صفحات -
تاریخ انتشار 2003