Morphological and Electromechanical Characterization of Ionic Liquid / Nafion Polymer Composites

نویسندگان

  • Matt Bennett
  • Donald Leo
چکیده

Ionic liquids have shown promise as replacements for water in ionic polymer transducers. Ionic liquids are non-volatile and have a larger electrochemical stability window than water. Therefore, transducers employing ionic liquids can be operated for long periods of time in air and can be actuated with higher voltages. Furthermore, transducers based on ionic liquids do not exhibit the characteristic back relaxation that is common with water-swollen materials. However, the physics of transduction in the ionic liquid-swollen materials is not well understood. In this paper, the morphology of Nafion / ionic liquid composites is characterized using small-angle X-ray scattering (SAXS). The electromechanical transduction behavior of the composites is also investigated. For this testing, five different counterions and two ionic liquids are used. The results reveal that both the morphology and transduction performance of the composites is affected by the identity of the ionic liquid, the cation, and the swelling level of ionic liquid within the membrane. Specifically, speed of response is found to be lower for the membranes that were exchanged with the smaller lithium and potassium ions. The response speed is also found to increase with increased content of ionic liquid. Furthermore, for the two ionic liquids studied, the actuators swollen with the less viscous ionic liquid exhibited a slower response. The slower speed of response corresponds to less contrast between the ionically conductive phase and the inert phase of the polymer. This suggests that disruption of the clustered morphology in the ionic liquid-swollen membranes as compared to water-swollen membranes attenuates ion mobility within the polymer. This attenuation is attributed to swelling of the non-conductive phase by the ionic liquids.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrical Impedance of Ionic Polymeric Metal Composites

In recent years the use of ionic polymer metal composites such as Nafion-based platinum ionomers have emerged as electroactive polymer materials with great potential for robotics and other applications. An effective activation of these materials requires understanding of their mechanism of operation. Generally, the material needs to be maintained hydrated to assure its electromechanical activit...

متن کامل

Micromechanics of actuation of ionic polymer-metal composites

Ionic polymer-metal composites ~IPMCs! consist of a polyelectrolyte membrane ~usually, Nafion or Flemion! plated on both faces by a noble metal, and is neutralized with certain counter ions that balance the electrical charge of the anions covalently fixed to the backbone membrane. In the hydrated state ~or in the presence of other suitable solvents!, the composite is a soft actuator and sensor....

متن کامل

Electroactive Polymer Actuator design for space applications

In order to achieve a distributed actuation in robotics and automation a novel soft actuator technology is being sought worldwide. One of the candidate technologies is based on Electroactive Polymers (EAP). The research to be done in the field of EAP actuators should cover four issues: material improvement, characterization and modeling, actuator design, and applications simulation. Advances on...

متن کامل

Verification of Micromechanical Models of Actuation of Ionic Polymer-metal Composites (IPMCs)

Ionic Polymer-metal Composites (IPMCs) are soft actuators and sensors. They generally consist of a thin perfluorinated ionomer membrane, metal electrodes plated on both faces, and are neutralized with certain counter cations, balancing the charge of the anions covalently fixed to the membrane. Under a suddenly applied step function (1 to 3 V), the IPMC in alkali-metal cation forms exhibits a fa...

متن کامل

Prepration and Characterization of Novel Ionoic Polymers to be Used as Artificial Muscles

      The muscle-like technology would be of enormous advantages for biomedical applications such as medical implants and human assist devices. Ionic polymer metal composites (IPMCs) are one kind of biomimetic actuators. An ionic polymer metal composite composed from an ionomer with high ion exchange capacity that packed between two thin metal layers. In the present study we focused on the prep...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005