Elastic properties of hollow colloidal particles.
نویسندگان
چکیده
The elastic properties of micrometer-sized hollow colloidal particles obtained by emulsion templating are probed by nanoindentation measurements in which point forces are applied to solvent-filled particles supported on a flat substrate. We show that the shells respond linearly up to forces of 7-21 nN, where the indentation becomes of the order of the shell thickness (20-40 nm). In the linear region, the particle deformation is reversible. The measured Young's modulus (approximately 200 MPa) is comparable to values for stiff rubbers or soft polymers. At larger applied force, we observe a crossover into a nonlinear regime, where the shells assume a buckled shape. Here, the force increases approximately as the square root of the indentation, in agreement with the theory of elasticity of thin shells. We also observe permanent deformation of the shells after probing them repetitively beyond the linear regime. Finally, the measured elastic properties of the shells nicely explain their spontaneous buckling in solution and due to drying.
منابع مشابه
Colloidosomes: selectively permeable capsules composed of colloidal particles.
We present an approach to fabricate solid capsules with precise control of size, permeability, mechanical strength, and compatibility. The capsules are fabricated by the self-assembly of colloidal particles onto the interface of emulsion droplets. After the particles are locked together to form elastic shells, the emulsion droplets are transferred to a fresh continuous-phase fluid that is the s...
متن کاملSynthesis and Characterization of Hollow and Non-Hollow Monodisperse Colloidal TiO2 Particles
Monodisperse spherical hollow and non hollow titania particles of variable sizes are produced in a sol gel synthesis from Ti(EtO)4 in ethanol. Hollow spherical particles of rutile were obtained by coating colloidal polystyrene beads with a titanium oxide hydrate layer and subsequently calcination at elevated temperatures in ol\ygen atmosphere. The non hollow titania particles were produced in t...
متن کاملSynthesis and utilization of monodisperse hollow polymeric particles in photonic crystals.
We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell th...
متن کاملEffect of colloidal Particles associated with the liquid bridge in sticking during drying in Superheated Steam
It is very important in the design of a drying system is to evaluate sticking behaviour of the materials goes under drying. A new approach to the sticking issue is applied in this study by carrying out a sticking test for the liquid associated with the materials under study. It was found that the liquid bridge is responsible of the initial sticking of the materials to the contact surface and th...
متن کاملFormation of highly ordered nanostructures by drying micrometer colloidal droplets.
Nanoparticles with well-defined chemical compositions can act as building blocks for the construction of functional structures, such as highly ordered aggregates, as well as porous and hollow aggregates. In this work, a spray-drying technique is used to form a crystal-like structure with nanoparticle building blocks. When spray-drying uniform spherical particles, tightly packed aggregates with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 78 5 Pt 1 شماره
صفحات -
تاریخ انتشار 2008