Ackstepping Control O Y Brushless
نویسندگان
چکیده
In this paper, a hybrid integrator backstepping controller is proposed for robotic manipulators actuated with brushless dc motors in the presence of arbitrary uncertain inertia parameters of the manipulator and the electrical parameters of the actuators. The main features are: 1) the design, requiring at most the joint velocities and stator currents feedback, 2) the semiglobal asymptotic stability of the controller being established in the Lyapunov sense, and 3) suitability of the scheme for multijoint robots. Simulation results are included to demonstrate the tracking performance.
منابع مشابه
An Improved Three-level Direct Torque Control Method of Brushless Doubly-fed Machine Based on the Fixed Synthesizing Vector
Article history: Received: 11. 09. 2013. Received in revised form: 17.10.2013. Accepted: 17.10.2013. With the rapid growth of an AC adjusted speed system application, it is necessary to control and reduce harmonic pollution since the problem brought about by the device of power electronics not only blocks the development of power electronics technology, but also causes severe harm in an electri...
متن کاملA New Hybrid Brushless DC Motor/Generator without Permanent Magnet
The Brushless DC (BLDC) motor is a simple robust machine which has found application over a wide power and speed of ranges in different shapes and geometry. This paper briefly reviews the fundamentals behind the motor and also the different types of BLDC motors with different geometries and then presents a new configuration for BLDC motor/generator, which does not use a permanent magnet in the ...
متن کاملAbout Commutation and Current Control Methods for Brushless Motors
For brushless motor drives, current control is often used to improve performance and reliability. This tutorial paper analyzes and compares various different schemes of electronic commutation and current control. Starting from a simple 6-step drive without current control, discussion will include bus current control, sinusoidal commutation, phase current control, and synchronous regulator. Rela...
متن کاملNeuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator
The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surfa...
متن کاملA Review of the Control Techniques for Brushless Direct Current Motors (REVIEW PAPER)
This paper surveys the literature of the brushless DC motor speed control techniques. The paper should prove useful to both researchers as well as practising engineers as a signpost to the current state of the art. Based on the review some further studies are suggested.
متن کامل