Cementitious Properties of Steelmaking Slags
نویسندگان
چکیده
منابع مشابه
Utilization of ironmaking and steelmaking slags
smelting of hammerable iron and its treatment in antiquity and Medieval produced also by-product: slag. Because of small yields of iron the process produced only small amounts of slag that did not attract attention of smelters concerning its possible use. the use of slag pieces was only accidental. a lot of slag pieces and blocks from slag pit shaft furnaces were used as a material for mound bu...
متن کاملRoles of Mineralogical Phases in Aqueous Carbonation of Steelmaking Slag
Mineralogical phases of steelmaking slags have significant influences on the carbonation of the slags. In this paper, the effects of temperature and reaction time on the conversion of calcium-related phases and the carbonation degree of a slag sample were studied. The experimental conditions were a liquid-to-solid ratio of 20 mL/g, a carbon dioxide flow rate of 1 L/min and a slag particle size ...
متن کاملPossible Uses of Steelmaking Slag in Agriculture: An Overview
Over the past decades, the steel production has increased and, consequently, the higher volumes of by-products and residues generated have driven to the reuse of these materials in an increasingly efficient way. In recent years new technologies have been expanded, and some of them are still under developing, in order to improve the recovery rates of slags. On this subject material separation te...
متن کاملMicrostructural Characterisation of Chromium Slags
J. Burja, F. Tehovnik, F. Vode, B. Arh, Institute of Metals and Technology, Ljubljana, Slovenia In this chromium slags that form during melting of chromium alloyed steels are examined. During melting and oxidation of these steel grades a considerable amount of chromium is lost, and gained back with slag reduction. Laboratory experiments were performed to study the mechanism of chromium oxide re...
متن کاملFoamy Slag Fundamentals and their Practical Application to Electric Furnace Steelmaking
This paper will define the slag compositions required to obtain and control optimum foamy slag conditions in the Electric Furnace. In defining the optimal slags, consideration is given to the effects of scrap quality, carbon injection, slag basicity and MgO content. A computer model based on published phase-diagrams has been developed which graphically maps the chemistries for optimal foaming c...
متن کامل