MPPT for DFIG Fed Stand Alone Wind Energy Conversion System
نویسندگان
چکیده
This paper deals with a control scheme to extract maximum power from the wind energy conversion system (WECS) using Maximum Power Point Tracking Algorithm (MPPT) from a Doubly Fed Induction Generator (DFIG). In order to ensure the continuous supply of power, battery backup is established. The control scheme for standalone system includes the charge controller circuit for battery bank and pitch control to ensure wind turbine within rated limits. A Boost converter is incorporated to control the charging and discharging rate of the battery.
منابع مشابه
Active and Reactive Power Control of a DFIG with MPPT for Variable Speed Wind Energy Conversion using Sliding Mode Control
This paper presents the study of a variable speed wind energy conversion system based on a Doubly Fed Induction Generator (DFIG) based on a sliding mode control applied to achieve control of active and reactive powers exchanged between the stator of the DFIG and the grid to ensure a Maximum Power Point Tracking (MPPT) of a wind energy conversion system. The proposed control algorithm is applied...
متن کاملOptimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System
In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...
متن کاملکنترل ژنراتور القایی تغذیۀ دوگانه برای توربین بادی 660 کیلوواتی در حالت مستقل از شبکه
In this paper, control of doubly fed induction generator (DFIG) for a variable speed wind turbine in stand-alone mode is analyzed and simulated. The purpose of stand-alone mode in this paper is a wind turbine which is assumed without the presence of energy storage systems (ESS) and other distributed generators (DGs). A large number of wind turbines installed in Iran are from 660 kW type and unt...
متن کامل15 MPPT Control Methods in Wind Energy Conversion Systems
Wind energy conversion systems have been attracting wide attention as a renewable energy source due to depleting fossil fuel reserves and environmental concerns as a direct consequence of using fossil fuel and nuclear energy sources. Wind energy, even though abundant, varies continually as wind speed changes throughout the day. The amount of power output from a wind energy conversion system (WE...
متن کاملModeling of Wind Energy Conversion System Including DFIG for Distributed Generation Studies
A detailed model of wind power station, including Double Fed Induction Generator, DFIG is presented in this paper. Two control mechanisms are included in the model. The inner control system uses stator flux oriented control for the rotor side converter and grid voltage vector control for the grid side converter. The outer control system is used for wind turbine pitch angle. PSCAD/EMTDC is us...
متن کامل