The Design of Tension Test Sensor and its Finite Element Analysis and Test Research
نویسندگان
چکیده
The tension test method of strip steel on stretching winding straightener tension roll group was elaborated. The material and paster form of resistance strain foil in tension test sensor were designed. The measure circuit of tension test sensor was designed. The material and structural form of elastic body of tension test sensor were designed. Strength computation was made on elastic body of tension test sensor. Threedimensional entity model of elastic body of tension test sensor was built by SolidWorks software. Finite element analysis was made on relative model by ANSYS software. Relative stress figure and displacement figure of elastic body of tension test sensor were obtained. Tension test sensor was manufactured based on design. Static state compression rigidity test of elastic body of tension test sensor was made. Relative test system constitution, test method and test process were elaborated. Relative test data were disposed. This research provides reliable base for the design of tension test sensor. Copyright © 2013 IFSA.
منابع مشابه
Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method
One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملFailure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملA New Restructured Shaded Pole Induction Motor- 3D Finite Element Analysis and Experimental Verification
Shaded pole induction motors, despite the simplicity and low cost, are difficult to analyze particularly in the equivalent circuit methods, due to the asymmetric structure, saturation, harmonics, inaccurate estimation of leakage inductances and skew. Hence, 3D numerical methods could be very useful in the design and optimization stage. This paper presents the 3D transient finite element analysi...
متن کاملThe Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis
Frictional shear stress is usually determined by utilizing the coefficient of friction or the constant friction factor models. The present study deals with finite element analysis of double cup extrusion process to determine the relationship between constant friction factor (m) and coefficient of friction (µ), since the metal flow in this process is very sensitive to frictional conditions. Ther...
متن کامل