FRC: A Method for Extending the Resolution of Nyquist Rate Converters Using Oversampling - Circuits and Systems II: Analog and Digital Signal Processing, IEEE Transactions on
نویسندگان
چکیده
Nyquist rate converters have traditionally been used for low to moderate resolution data acquisition applications. In this paper, we describe a feedforward residue compensation (FRC) technique to extend the resolution of such converters using an oversampling modulator loop. Closed-form analytical expressions are developed to provide insight into the operation and limits on the resolution of such converters. Simulation results are used to verify the operation and confirm the limitations of this technique.
منابع مشابه
Improving adaptive resolution of analog to digital converters using least squares mean method
This paper presents an adaptive digital resolution improvement method for extrapolating and recursive analog-to-digital converters (ADCs). The presented adaptively enhanced ADC (AE-ADC) digitally estimates the digital equivalent of the input signal by utilizing an adaptive digital filter (ADF). The least mean squares (LMS) algorithm also determines the coefficients of the ADF block. In this sch...
متن کامل0 - 7803 - 5129 - 0 / 99 © IEEE 1999 MP 3 . 3 A Nyquist - Rate
Oversampling and noise-shaping techniques, such as Σ∆ modulation, have an inherent tradeoff between accuracy and speed, whereby resolution in amplitude is at the expense of resolution in time. Because their internal circuits must operate over many clock cycles to produce a single result, they have limited data rates and power dissipation is a concern. Much attention has been focused on improvin...
متن کاملNyquist-rate digital-to-analog converter architectures - IEEE Potentials
he ever-dropping cost of Very Large Scale Integrated (VLSI) circuits allows many analog functions to be done digitally. However, the real world still is, and will always continue to be, a fundamentally analog place. Thus, the analog signal of interest is translated into a format that a digital computer can utilize. This translation is the function of an Analog to Digital Converter (ADC). After ...
متن کاملWeighted median filters with sigma-delta modulation encoding
Oversampled Sigma-Delta modulation (SDM) is becoming a standard method for implementing high-resolution A/D and D/A converters in silicon. Digital decimation lters play a fundamental role in Oversampled Sigma-Delta A/D decoders. In this paper, we rst show that Weighted Median Filters (WMF) can be used for SDM decimation lters and that these lters are readily implemented in the SDM binary domain...
متن کاملBackground Digital Calibration Techniques for Pipelined ADCTMs - Circuits and Systems II: Analog and Digital Signal Processing, IEEE Transactions on
A skip and fill algorithm is developed to digitally self-calibrate pipelined analog-to-digital converters (ADC’s) in real time. The proposed digital calibration technique is applicable to capacitor-ratioed multiplying digital-to-analog converters (MDAC’s) commonly used in multistep or pipelined ADC’s. This background calibration process can replace, in effect, a trimming procedure usually done ...
متن کامل