AN AES INVESTIGATION OF ALUMINUM, Al OXIDE AND Al NITRIDE
نویسنده
چکیده
The aluminum-L,,VV Auger spectra for elemental Al. Al oxide and Al nitride have been measured in an assessment of the utility of Auger spectroscopy in characterizing thin oxidized Al films used in model supported-metal catalyst studies. Clearly distinct spectra were found for the three surface chemical states. The oxide spectrum was shown to be similar to published spectra from bulk, single-crystalline AI,O,. Complete oxidation of Al films required exposure to 0, at temperatures above room temperature. Room temperature exposure to hydrazine resulted in the complete nitriding of Al films. The spectrum for the nitride is similar in shape to published spectra from films produced by two alternative methods of nitriding. The hydrazine-exposure method of producing Al nitride films was found to offer an alternative, easily prepared support material for future model catalyst studies.
منابع مشابه
Molecular Dynamics Simulation of Al/NiO Thermite Reaction Using Reactive Force Field (ReaxFF)
In this work, the thermal reaction of aluminum (Al) and nickel oxide (NiO) was investigated by molecular dynamics simulations. Some effective features of reaction such as reaction temperature, the reaction mechanism, and diffusion rate of oxygen into aluminum structure were studied. ReaxFF force field was performed to study the Al/NiO thermite reaction behavior at five different temperatures (5...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملThe effect of alumina and aluminium nitride coating by reactive magnetron sputtering on the resin bond strength to zirconia core
PURPOSE Although several surface treatments have been recently investigated both under in vitro and in vivo conditions, controversy still exists regarding the selection of the most appropriate zirconia surface pre-treatment. The purpose of this study was to evaluate the effect of alumina (Al) and aluminium nitride (AlN) coating on the shear bond strength of adhesive resin cement to zirconia cor...
متن کاملImpact of ALD grown passivation layers on silicon nitride based integrated optic devices for very-near-infrared wavelengths.
A CMOS compatible post-processing method to reduce optical losses in silicon nitride (Si(3)N(4)) integrated optical waveguides is demonstrated. Using thin layer atomic layer deposition (ALD) of aluminum oxide (Al(2)O(3)) we demonstrate that surface roughness can be reduced. A 40 nm thick Al(2)O(3) layer is deposited by ALD over Si(3)N(4) based strip waveguides and its influence on the surface r...
متن کاملEffects of Nano-Aluminum Nitride on the Performance of an Ultrahigh-Temperature Inorganic Phosphate Adhesive Cured at Room Temperature
Based on the optimal proportion of resin and curing agent, an ultrahigh-temperature inorganic phosphate adhesive was prepared with aluminum dihydric phosphate, aluminium oxide ( α -Al₂O₃), etc. and cured at room temperature (RT). Then, nano-aluminum nitride (nano-AlN), nano-Cupric oxide (nano-CuO), and nano-titanium oxide (nano-TiO₂) were added into the adhesive. Differential scanning calorimet...
متن کامل