Thermal behaviour of romarchite phase SnO in different atmospheres: a hypothesis about the phase transformation
نویسندگان
چکیده
A study was conducted on the transformation of SnO to SnO2 using X-ray diffraction and subjecting the SnO to heat treatments between 300 °C < T < 600 °C in two different atmospheres, argon and air. The intermediary oxide that appears in the disproportionation process was identified as Sn2O3. In an argon atmosphere, decomposition occurs in three stages: (1) a direct transformation of SnO to SnO2, (2) the formation of some intermediary Sn2O3 from SnO, and (3) the conversion of the Sn2O3 to SnO2 with the formation of metallic tin, Sn (l). When an atmosphere of air is used, however, a reaction occurs, concurrent with the decomposition reactions, that relates to the specific oxidation of the metallic tin produced in the course of the three process stages.
منابع مشابه
Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions
Many researchers have investigated how to increase the overall efficiency of solar-driven thermal systems. Several key parameters, such as collector efficiency and storage tank characteristics, may impose some constraints on the annual solar fraction (ASF) of such systems. In this paper, the behaviour of integrating the phase change material (PCM) in SDHW systems is modelled and optimized n...
متن کاملOptimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions
Many researchers have investigated how to increase the overall efficiency of solar-driven thermal systems. Several key parameters, such as collector efficiency and storage tank characteristics, may impose some constraints on the annual solar fraction (ASF) of such systems. In this paper, the behaviour of integrating the phase change material (PCM) in SDHW systems is modelled and optimized n...
متن کاملبررسی تغییرات فازی سیلیس و سیلیسیوم به هنگام آسیاب کاری
In the present study phase transformation of silicon and silica during milling in different atmospheres was investigated. The silicon powder was subjected to high energy ball milling in ammonia (25%) atmosphere. The milled powder was subsequently annealed at 1200 ◦C for 1 hour. In another test a mixture of AlN and amorphous silica (micro silica) was subjected to high energy ball milling. The m...
متن کاملRegularities of solid-phase interaction of tin and molybdenum oxides: Catalytic properties
The interaction in the system of SnO2 and h-MoO3 prepared by their joint mechanical activation in a roller-ring vibratory mill was investigated. A series of catalysts was prepared with SnO2: h-MoO3 molar ratio 1:1; 1:2.3; 2.3:1 and 5.7:1. The catalysts were characterized by various techniques including X-ray phase, X-ray diffraction (XRD) and synchron...
متن کاملStudy of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples
Anatase-to-rutile phase transformation was studied in milled and unmilled samples. Ball milling was carried out in two types of ball mills, planetary and tumbler, with a ball-to-powder ratio of 40:1 over 2-48 hours. First, the unmilled samples were heated in the furnace at various temperatures for different periods of time. The results revealed that the anatase-to-rutile transformation comple...
متن کامل