Characteristics of Switched Reluctance Motor Operating in Continuous and Discontinuous Conduction Mode
نویسندگان
چکیده
This paper presents mechanical characteristics of Switched Reluctance Motor (SRM) when it operates in Discontinuous Conduction Mode (DCM) or in Continuous Conduction Mode (CCM), i.e. when the current through the phase coils (windings) flows discontinuously or continuously. Firstly, in order to maximize the output power of SRM optimization of its control parameters was performed, such that the peak and RMS values of the current do not exceed the predefined values. The optimal control parameters vs. rotation speed, as well as the corresponding characteristics of torque, power and efficiency. It is shown that with CCM the machine torque (power), at high speed, can be increased.
منابع مشابه
Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach
Dynamic modeling and control of dc-dc series resonant converter (SRC) especially when operating in discontinuous conduction mode (DCM) is still a challenge in power electronics. Due to semiconductors switching, SRC is naturally represented as a switched linear system, a class of hybrid systems. Nevertheless, the hybrid nature of the SRC is commonly neglected and it is modeled as a purely contin...
متن کاملEnergy-Based Adaptive Sliding Mode Speed Control for Switched Reluctance Motor Drive
Torque ripple minimization of switched reluctance motor drives is a major subject based on these drives’ extensive use in the industry. In this paper, by using a well-known cascaded torque control structure and taking the machine physical structure characteristics into account, the proposed energy-based (passivity-based) adaptive sliding algorithm derived from the view point of energy dissipati...
متن کاملInfluence of Operation Conditions Upon the Dynamic Steady State Performance of Switched Reluctance Motor
In order to obtain more accurate predicted dynamic steady-state performance with shorter computation time, an available mathematical model is modified and presented. Using this modified model, performance of a typical switched reluctance motor (SRM) under a wide range of variations of operating conditions is obtained and discussed. These include variations of speed, voltage, load and switching ...
متن کاملA NEW METHOD TO REDUCE TORQUE RIPPLE IN SWITCHED RELUCTANCE MOTOR USING FUZZY SLIDING MODE
This paper presents a new control structure to reduce torque ripple in switched reluctance motor. Although SRM possesses many advantages in motor structure, it suers from large torque ripple that causes some problems such as vibration and acoustic noise. In this paper another control loop is added and torque ripple is de ned as an objective function. By using fuzzy sliding mode strategy, the DC...
متن کاملDirect Torque Control of 5-Phase 10/8 Switched Reluctance Motors
A switched Reluctance motor (SRM) has several desirable features, including simple construction, high reliability and low cost. However, it suffers from large torque ripple, highly non-uniform torque output and magnetization characteristics and large noise. Several studies have succeeded in torque ripple reduction for SRM using Direct Torque Control (DTC) technique. DTC method has many adva...
متن کامل