Wavelet Transform based Broken Rotor-bar Fault Detection and Diagnosis Performance Evaluations
نویسندگان
چکیده
This paper presents the performances evaluation of different wavelet transform under broken rotor bars fault diagnosis. In this report, stator phase current was used for wavelet analysis. Discrete wavelet transform (DWT) coefficients of stator current in a specific frequency band are derived and analyzed. Wavelets db8, db9, db10, sym7 and sym8 are employed to analyze broken bar distorted stator current. The sensitivities of these wavelets to fault signal are compared and assessed to select the most optimal one. This approach facilitates the detection and diagnosis of broken rotor bar occurrence or even number of broken bars under load variation. Simulation and experimental tests on induction motors with 1, 2, and 3 broken bars cases are conducted and demonstrate the effectiveness of the proposed approach for fault detection.
منابع مشابه
Rotor Faults Detection in Induction Motor by Wavelet Analysis
ABSTRACT Motor current signature analysis has been successfully used for fault diagnosis in induction motors. However, this method does not always achieve good results when the speed or the load torque is not constant, because this cause variation on the motor slip and fast Fourier transform problems appear due to non-stationary signal. This paper experimentally describes the effects of rotor b...
متن کاملOnline Adaptive Continuous Wavelet Transform and Fuzzy Logic Based High Precision Fault Detection of Broken Rotor Bars for IM
This paper presents an intelligent fault detection based on adaptive continuous wavelet transform of broken rotor bars for Induction Motor (IM). Broken rotor bars, bearing decay, eccentricity, as motor faults appears as different frequencies in the stator current signals. The stator current and speed signals at deferent operation conditions obtained from the winding function are analysed throug...
متن کاملA Case Study on the Comparison of Non-parametric Spectrum Methods for Broken Rotor Bar Fault Detection
Broken rotor bars in an induction motor create asymmetries and result in abnormal amplitude of the sidebands around the fundamental supply frequency and its harmonics. Applying a spectrum analysis technique on motor current and inspecting the spectrum amplitudes at the broken rotor bar specific frequencies for abnormality is a well-known procedure for broken rotor bar fault detection and diagno...
متن کاملSimultaneous Detection of Broken Rotor Bar Fault and PQ disturbances in the Supply to Induction Motor Using Neuro-Fuzzy
This paper presents a methodology for the detection of broken rotor bar fault and power quality (PQ) disturbances in the supply to induction motor. These faults lead to increase in the temperature and decrease in the efficiency of the induction motor. Wavelet transform is applied to the stator current, for the extraction of the signature of the fault. These wavelet coefficients are fed as input...
متن کاملA Novel Technique for Rotor Bar Failure Detection in Single-Cage Induction Motor Using FEM and MATLAB/SIMULINK
In this article, a new fault detection technique is proposed for squirrel cage induction motor SCIM based on detection of rotor bar failure. This type of fault detection is commonly carried out, while motor continues to work at a steady-state regime. Recently, several methods have been presented for rotor bar failure detection based on evaluation of the start-up transient current. The proposed ...
متن کامل