Analysis of material recovery facilities for use in life-cycle assessment.
نویسندگان
چکیده
Insights derived from life-cycle assessment of solid waste management strategies depend critically on assumptions, data, and modeling at the unit process level. Based on new primary data, a process model was developed to estimate the cost and energy use associated with material recovery facilities (MRFs), which are responsible for sorting recyclables into saleable streams and as such represent a key piece of recycling infrastructure. The model includes four modules, each with a different process flow, for separation of single-stream, dual-stream, pre-sorted recyclables, and mixed-waste. Each MRF type has a distinct combination of equipment and default input waste composition. Model results for total amortized costs from each MRF type ranged from $19.8 to $24.9 per Mg (1Mg=1 metric ton) of waste input. Electricity use ranged from 4.7 to 7.8kWh per Mg of waste input. In a single-stream MRF, equipment required for glass separation consumes 28% of total facility electricity consumption, while all other pieces of material recovery equipment consume less than 10% of total electricity. The dual-stream and mixed-waste MRFs have similar electricity consumption to a single-stream MRF. Glass separation contributes a much larger fraction of electricity consumption in a pre-sorted MRF, due to lower overall facility electricity consumption. Parametric analysis revealed that reducing separation efficiency for each piece of equipment by 25% altered total facility electricity consumption by less than 4% in each case. When model results were compared with actual data for an existing single-stream MRF, the model estimated the facility's electricity consumption within 2%. The results from this study can be integrated into LCAs of solid waste management with system boundaries that extend from the curb through final disposal.
منابع مشابه
Using Life Cycle Assessment Method for Selecting Optimal Waste Management System in Tehran City
Introduction: In Tehran with a population of 9 million currently, about 2.5 million tons municipal solid waste have been producing annually. Materials and Models: In this study by using Life Cycle Assessment (LCA) model an optimal system of waste management of Tehran was recommended. Based on the quantity and quality of waste in Tehran in 2013 and facilities, three scenarios were selected. Fir...
متن کاملUsing life cycle assessment for municipal solid waste management in Tehran Municipality Region 20
Background: Due to the lack of a proper waste management system, Tehran Municipality Region 20 is facing economic and environmental problems such as the high costs of a disposal system and source pollution. Life cycle assessment (LCA) is a method for collecting and evaluating the inputs, outputs, and potential environmental impacts of a product system throughout its life cycle. The current stud...
متن کاملLife cycle assessment of steel production from iron scrap: a case study at a steel plant
Background and Objective: The steel industry is the world's largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro softw...
متن کاملProvisional Evaluation of Composting as Priority Option for Sustainable Waste Management in South-West Nigeria
The management of Municipal Solid Waste (MSW) in Nigeria and most developing countries has remained a major public health challenge, thus creating the need for reliable and environmentally-acceptable alternatives. This study focuses on composting assessment as a viable recovery alternative for MSW in six States of Southwest Nigeria, namely: Ekiti, Osun, Ondo, Ogun, Oyo, and Lagos. Extensive lit...
متن کاملProvisional Evaluation of Composting as Priority Option for Sustainable Waste Management in South-West Nigeria
The management of Municipal Solid Waste (MSW) in Nigeria and most developing countries has remained a major public health challenge, thus creating the need for reliable and environmentally-acceptable alternatives. This study focuses on composting assessment as a viable recovery alternative for MSW in six States of Southwest Nigeria, namely: Ekiti, Osun, Ondo, Ogun, Oyo, and Lagos. Extensive lit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Waste management
دوره 35 شماره
صفحات -
تاریخ انتشار 2015