Numerical Investigations of Body Tail Projectile
نویسندگان
چکیده
The unsteady compressible flow around a body tail projectile is numerically solved with a Large Eddy Simulation (LES) method, Smagorinsky-Lilly model was used as the Sub-Grid Scale (SGS). The computed results are obtained in supersonic flow regime for a viscous fluid in order to determine the aerodynamic coefficients with different angles of attack. The flow around a body tail projectile was solved as a three-dimensional flow.
منابع مشابه
Investigations of impact biomechanics for penetrating ballistic cases.
This study aims to investigate the penetration of a projectile into a surrogate human tissue numerically, using Finite Element (FE) simulation. 20% Balistic Gelatin material (BG) is simulated with an elasto-plastic hydrodynamic constitutive law, and then impacted by steel spheres at different velocities. The results from the FE simulations are compared with existing experimental data and other ...
متن کاملAnalytical and Numerical Consideration of Projectile Density Effect on Its Penetration Ability in Alumina Armor
In this paper, penetration of high velocity impact of 4340 steel and tungsten carbide projectiles with specific shapes in to ceramic armor that includes 10 mm alumina (95%) is considered analytically and simulated with Ls-Dyna software. Bernoulli equation used to consider the penetration velocity in ceramics, shows that the penetration is better and easier by increasing projectile density. The ...
متن کاملNumerical simulation of flow hydrodynamic around dolphin body in viscous fluid
The biomimetic and hydrodynamic study of aquatic animals is one of the most challenging computational fluid dynamics topics in recent studies due to the complexity of body geometry and the type of flow field. The movement of the aquatic body, and particularly the tail section and the corresponding movement of fluid around the body, causes an unsteady flow and requires a comprehensive study of t...
متن کاملNumerical analysis of low velocity impact on ceramic-metal-composite targets
In the present paper, the problem of low velocity impact of plates made from different configurations of ceramic, aluminum, steel and composite (S-glass polyester) is analyzed numerically using Abaqus finite element software. The projectile is assumed to be a rigid body with a hemispherical head. Also, for ceramic layers, Holmquist constitutive model, for aluminum and steel layers, Johnson Coo...
متن کاملمحاسبه سطح مقطع جزیی انتقال حالت به حالت بار به روش فادیف
A second-order approximation to the Faddeev-Watson-Lovelace treatment of the rearrangement channel is used in a three-body scattering cross sections. In this formalism, the Three-body wave function is expressed by three coupled integral equations, the Faddeev equations, which contian the two-body (off-shell) transition amplitudes, and proved the uniqueness of their solutions. This amplitude c...
متن کامل