Pressurized Flow Solubilization System Using Electromagnetic Induction Heating Technique for Simultaneous Determination of Inorganic Elements
نویسنده
چکیده
A pressurized continuous flow system using electromagnetic induction heating technique has been developed for the determination of trace and minor element content in biological samples by microwave induced plasma-optical emission spectrometry (MIP-OES). The system allows the continuous solubilization of samples at an optimized temperature of 120 °C and pressure of 3.5 bar in 40 min. A system was used to perform off-line solubilization of slurried samples of biological tissues, non-fat milk powder and lichen (3% m/v). Recovery of trace and minor elements averaged 99.2 ± 0.1% was performed by MIP-OES using external calibration technique. The accuracy of the method was proved using certified reference materials from the National Research Council Canada (NRCC, Dogfish Liver, DOLT-2), National Institute of Standards and Technology (NIST, (Non-Fat Milk Powder, NIST 1549) and International Atomic Energy Agency (IAEA, Lichen, IAEA-336). Satisfied analytical results were also obtained in real sample analysis of milk powder, barley and cinnamon.
منابع مشابه
Autohydrolysis pretreatment of Arundo donax: a comparison between microwave-assisted batch and fast heating rate flow-through reaction systems
BACKGROUND Autohydrolysis of lignocellulosic biomass in liquid hot water has been widely studied owing to its high efficiency and relatively low cost. In the perspective of industrial applications, continuous or semi-continuous processes are more interesting than batch systems. Moreover, microwave heating of pretreatment systems has been proposed to intensify the kinetics of the process. In thi...
متن کاملElectromagnetic and thermal analysis of induction heating of billets by rotation in DC magnetic field
Induction heating is a widespread industrial technique and a subject of scientific research. The application fields of induction heating increase due to development of modern industrial technologies and advantages of the induction heating process. The development of traditional induction heating system applications for melting or through heating is mainly to increase power or production rates o...
متن کاملPerformance and Emission Characteristics of Dual Fuel Engines at Part Loads Using Simultaneous Effect of Exhaust Gas Recirculation and Pre-Heating of In-let Air
In this study, a numerical simulation using the CFD software, FLUENT, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the EGR rate with minimum pressure loss at the part load operation range. The CFD results reveal that the venturi should be precisely optimized to introduce the required ...
متن کاملA Study on Neodymium Recovery from Aqueous Solutions for Designing a New Generation of Sandwich Liquid Membrane
Liquid Membrane (LM) based processes, as Supported Liquid Membranes (SLMs), have been proposed, for over 30 years, as effective methods for the selective separation of inorganic/organic species from different water streams. The industrial use of SLMs has been limited mainly by their insufcient stability. To investigate on the main cause of system destabilization and the o...
متن کاملAn Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE)
In design of a parallel resonant induction heating system, choosing a proper capacitancefor the resonant circuit is quite important. The capacitance affects the resonant frequency, outputpower, Q-factor, heating efficiency and power factor. In this paper, the role of equivalent seriesresistance (ESR) in the choice of capacitance is significantly recognized. Optimal value of resonancecapacitor i...
متن کامل