Crystalline and amorphous FeTi and Fe2Ti.
نویسندگان
چکیده
منابع مشابه
Hwride : Its Formation , Properties , and Application
Iron and titanium form two known stable intermetallic compounds, FeTi and Fe2Ti. exists above 1000°C , decomposing to FeTi and T i below that temperature. We have briefly noted previousl;’ that one of these compounds, FeTi, will react directly with hydrogen to form a n easily decomposed hydride which may be useful as a hydrogen storage medium. Our primary purpose here is to discuss the Fe-Ti-H ...
متن کاملMaterials Chain 2016
Advanced High Strength Steels (AHSS) provide a good combination of both strength and formability and are therefore applied extensively in the automotive industry, especially in the crash relevant parts of the vehicle. Dual-phase (DP) steel is an example for such AHSS which is widely employed. The excellent macroscopic behavior of this steel is a result of the inherent micro-heterogeneity and co...
متن کاملNIC Symposium 2016
Advanced High Strength Steels (AHSS) provide a good combination of both strength and formability and are therefore applied extensively in the automotive industry, especially in the crash relevant parts of the vehicle. Dual-phase (DP) steel is an example for such AHSS which is widely employed. The excellent macroscopic behavior of this steel is a result of the inherent micro-heterogeneity and co...
متن کاملFE2TI: Computational Scale Bridging for Dual-Phase Steels
A scale bridging approach combining the FE method with parallel domain decomposition (FETI) is presented. The FETI approach is used in the project “EXASTEEL Bridging Scales for Multiphase Steels” (within the German priority program “Software for Exascale Computing SPPEXA”) for the simulation of modern dual-phase steels. This approach incorporates phenomena on the microscale into the macroscopic...
متن کاملSolid-State Diffusion Bonding of Commercially pure Titanium and Precipitation Hardening Stainless steel
Solid-state direct diffusion bonding of commercially pure Titanium (Cp-Ti) and precipitation hardening stainless steel (PHSS) has been carried out in the temperature range of 800°C to 1000°C with an interval of 50°C for 3.6 ks under 3.5 Mpa uniaxial load in (4 to 6)×10 Pa vacuum. The effects of temperatures have been investigated with reference to bond strength. The examination revealed that th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. B, Condensed matter
دوره 31 12 شماره
صفحات -
تاریخ انتشار 1985