A new method for Real-Time LWD data compression
نویسندگان
چکیده
Logging while drilling (LWD) is an advanced drilling technology in oil/gas exploration and development, which was developed to increase drilling efficiency and decrease drilling cost. The real-time logging data transmission by the limited transmission bandwidth is a key technology in LWD. Compressing logging data by some algorithm is an evident method to enhance data transmission. This paper introduced a novel LWD data compression method on the basis of Differential Pulse Code Modulation (DPCM). Our algorithm can optimize compression parameters to improve the compression efficiency and adjust compression parameters for different application. Extensive experiments show that our method can give enough precise results with the compression ratio of 50% at least and our algorithm has the advantages of alterable compressing ratio, excellent decode quality and low algorithm complexity.
منابع مشابه
DPCM Compression for Real-Time Logging While Drilling Data
Logging while drilling (LWD) is a drilling technique which obtains and transmits the logging data during oil/gas drilling operations. Because of the limited available transmission bandwidth of mud channel, how to improve the bandwidth utilization becomes a critical problem in LWD research. In this paper, by discussing the information entropy of real logging data, we find that the original encod...
متن کاملRaptor Codes for Real-time Mud Pulse Telemetry in M/lwd System
The Measurement/Logging While Drilling (M/LWD) system is a kind of sensors system which is used to help oil/gas drilling field technicians to steer well drilling. In M/LWD, several kinds of sensors are installed into drill string to measure the underground logging data during well drilling operations, and a sink within the drill string collects the logging data from the sensors and then transmi...
متن کاملDetermining the Proper compression Algorithm for Biomedical Signals and Design of an Optimum Graphic System to Display Them (TECHNICAL NOTES)
In this paper the need for employing a data reduction algorithm in using digital graphic systems to display biomedical signals is firstly addressed and then, some such algorithms are compared from different points of view (such as complexity, real time feasibility, etc.). Subsequently, it is concluded that Turning Point algorithm can be a suitable one for real time implementation on a microproc...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملAn Integrated Approach for Monitoring Contemporary and Recruitable Large Woody Debris
Large woody debris (LWD) plays a critical structural role in riparian ecosystems, but it can be difficult and time-consuming to quantify and survey in the field. We demonstrate an automated method for quantifying LWD using aerial LiDAR and object-based image analysis techniques, as well as a manual method for quantifying LWD using image interpretation derived from LiDAR rasters and aerial four-...
متن کامل