An Investigation of the Essential Matrix
نویسنده
چکیده
منابع مشابه
An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
Fracture analysis of glass/epoxy composites under different thermal cycling conditions is considered. Temperature difference, stacking sequence, fiber volume fraction and number of thermal cycles are selected as the experimental design factors. The Taguchi method is implemented to design of the experiment and an apparatus is developed for automatic thermal cycling tests. The tensile tests are d...
متن کاملInvestigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers
Using natural hemp fibers to reinforce the tensile characteristics of polymer matrix composites is investigated in this article. The fibers were applied to the epoxy matrix in unidirectional and hybrid tissue forms. After preparation of standard tensile stress test specimens via manual layup, the standard tensile test was done. Young’s modulus, ultimate tensile stress, and the amount of absorb...
متن کاملAn Investigation into the Optimization of Release Profile of Lithium Carbonate from Matrix-type Tablets Containing Carbopols, Pemulen and Eudragits
The influence of various polymers on the release rate of lithium carbonate from matrix-type tablets was investigated in an attempt to formulate a sustained release solid dosage form. For this purpose, tablets containing 450 mg of lithium carbonate along with various amounts of Carbopol 934P, 971P, 974P, Pemulen and Eudragit RLPO as retarding agents and inactive ingredients (e.g. PVP, Avicel or ...
متن کاملAn Investigation into the Optimization of Release Profile of Lithium Carbonate from Matrix-type Tablets Containing Carbopols, Pemulen and Eudragits
The influence of various polymers on the release rate of lithium carbonate from matrix-type tablets was investigated in an attempt to formulate a sustained release solid dosage form. For this purpose, tablets containing 450 mg of lithium carbonate along with various amounts of Carbopol 934P, 971P, 974P, Pemulen and Eudragit RLPO as retarding agents and inactive ingredients (e.g. PVP, Avicel or ...
متن کاملAn Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites
Fabrication and characterization of aluminum matrix composites containing different volume fractions of Ni3Al powder (5-40 Vol%) were investigated. Ni3Al powder was produced by mechanical alloying of elemental nickel and aluminum powder mixture. Al-Ni3Al composite parts were prepared using a powder metallurgy route involving two stages Al and Ni3Al powder mixtures were first compacted under 500...
متن کاملAn Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites
Fabrication and characterization of aluminum matrix composites containing different volume fractions of Ni3Al powder (5-40 Vol%) were investigated. Ni3Al powder was produced by mechanical alloying of elemental nickel and aluminum powder mixture. Al-Ni3Al composite parts were prepared using a powder metallurgy route involving two stages Al and Ni3Al powder mixtures were first compacted under 500...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001