High Field Strength in a Large Volume: The Intrinsic Reverberation Chamber
نویسنده
چکیده
An intrinsic reverberation chamber with non-parallel walls, ceiling not parallel to the floor, at most two walls placed perpendicular and with fixed field diffusers is presented. Inside this room no eigenmodes exist and a diffuse, statistically uniform field is created without the use of a mechanical mode stirrer. As a result, test time can be reduced drastically compared to mode stirred reverberation chambers.
منابع مشابه
High Intensity Electromagnetic Field Generation using a Transportable Reverberation Chamber
A reverberation chamber can create very high field strength with moderate input power. Existing chambers are making use of a paddle wheel to change the resonant modes in the chamber. A transportable reverberation chamber with vibrating walls will be presented. Inside this Vibrating Intrinsic Reverberation Chamber (VIRC) a diffuse, statistically uniform electromagnetic field is created, without ...
متن کاملIn-situ EMI Measurements Using a Vibrating Intrinsic Reverberation Chamber
A new reverberation chamber with varying angles between wall, floor and ceiling and with vibrating walls is used for in-situ testing of a large radar antenna system. Inside this Vibrating Intrinsic Reverberation Chamber (VIRC) a diffuse, statistically uniform electromagnetic field is created without the use of a mechanical, rotating, mode stirrer. This chamber results in a better homogeneity an...
متن کاملOptimization of Stirrer with Various Param- Eters in Reverberation Chamber
Reverberation chambers are widely used in electromagnetic compatibility test facilities because they provide a large working volume and are cheaper than other types of test facilities. In addition, they provide a statistically uniform field and generate a high maximum electric field within a relatively large volume. The volume of the cavity, the structure of the stirrer, and high tested frequen...
متن کاملتحلیل آکوستیکی یک اتاق نیمه صامت با چینش متقاطع جاذب الیافی مکعب مستطیل
Introduction: The previous studies have used fibrous absorbents usually in the form of cone-shaped wedges for making anechoic and semi-anechoic chambers which their design and construction have been costly and difficult. The present study aimed to design a semi-anechoic chamber, using rectangular fibrous absorbents and also perform acoustic analysis for it. . Material and Method: In the presen...
متن کاملOptimizing the Stirring Strategy for the Vibrating Intrinsic Reverberation Chamber
This work describes the definition, application and assessment of a factorial plan with the aim of gaining insight on what kind of stirring strategy could work the best in a vibrating intrinsic reverberation chamber. Three different stirring strategies were defined as factors of a factorial plan. We assess the overall reverberation performance according to three different indicators. With the h...
متن کامل