Correlation Between Measured and Simulated Parameters of a Proposed Transfer Standard - Tyco Electronics
نویسندگان
چکیده
Total radiated power of a device can be measured using a mode stirred chamber (MSC). The technique is briefly outlined with emphasis on the peak and average error associated with this technique. A transfer standard, advocated by the IEEE EMCS P482 Working Group, is used as a noise source for a cable radiation study which measured and simulated the total radiated power from a cable-like noise source. Two techniques, the Finite Difference Time Domain (FDTD) and the Method of Moments (MOM) were used to predict the total radiated power. This work represents an initial step in relating system level emission requirements to component level electrical parameters such as transfer impedance.
منابع مشابه
Filtering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کاملDesign and Analysis of New Level Shifter With Gate Driver for Li-Ion Battery Charger in 180nm CMOS Technology
In this work, the design and analysis of new Level Shifter with Gate Driver for Li-Ion battery charger is proposed for high speed and low area in 180nm CMOS technology. The new proposed level shifter is used to raise the voltage level and significantly reduces transfer delay 1.3ns (transfer delay of conventional level shifter) to 0.15ns with the same input signal. Also, the level shifter with g...
متن کاملA New Compact Ultra-wideband Linear Antenna Array for Target Detection Applications
This paper presents a low-cost compact planar microstrip-fed monopole antenna and its four-element array design for ultra-wideband (UWB) wireless communication and target detection applications, respectively, operating in the frequency span of 3 GHz to 11 GHz. A prototype was fabricated and then measured based on optimal parameters. The results of reflection coefficient (S11) and radiation patt...
متن کاملA New Hybrid Routing Algorithm based on Genetic Algorithm and Simulated Annealing for Vehicular Ad hoc Networks
In recent years, Vehicular Ad-hoc Networks (VANET) as an emerging technology have tried to reduce road damage and car accidents through intelligent traffic controlling. In these networks, the rapid movement of vehicles, topology dynamics, and the limitations of network resources engender critical challenges in the routing process. Therefore, providing a stable and reliable routing algorithm is ...
متن کاملDesign of magnetic dipole based 3D integration nano-circuits for future electronics application
Nano Magnetic Logic (NML) has been attracting application in optical computing, nanodevice formation, and low power. In this paper nanoscale architecture such as the decoder, multiplexer, and comparator are implemented on perpendicular-nano magnetic logic (pNML) technology. All these architectures with the superiority of minimum complexity and minimum delay are pointed. The proposed architectur...
متن کامل