Low Power Low Voltage OTA using Adaptive Bias
نویسنده
چکیده
The very fast growing market of portable equipment is increasing interest in low power integrates circuit. So, designing low power integrated circuits requires reduction of supply voltages and interconnection parasitic to minimum but reduction in supply voltage implies series of problems in circuit design. To overcome these issues, an Ultra low power low voltage two stage class AB CMOS fully differential operational amplifier Op-Amp) operating at 0.4 V supply design in low cost 90nm CMOS technology is proposed.
منابع مشابه
Design of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملDesign and Analysis of Gain Boosted Recycling Folded Cascode OTA
In this paper, a low Power, Gain Boosted Recycling Folded Cascode Operational Transconductance Amplifier (GB-RFC OTA) is described. The proposed GB-RFC OTA is designed using 130nm CMOS technology and achieves enhanced gain, unity gain bandwidth and slew rate with the low Power budget. The proposed circuit operates on 1V supply voltage and 200 μA bias current and consumes a power of 798μW.The GB...
متن کاملA New Low-Voltage, Low-Power and High-Slew Rate CMOS Unity-Gain Buffer
Class-AB circuits, which are able to deal with currents several orders of magnitude larger than their quiescent current, are good candidates for low-power and high slew-rate analog design. This paper presents a novel topology of a class AB flipped voltage follower (FVF) that has better slew rate and the same power consumption as the conventional class-AB FVF buffer previously presented in liter...
متن کاملImproved PSRR and Output Voltage Swing Characteristics of Folded Cascode OTA
Mixed and analog systems design with high performance suffers from many difficulties due to supply voltage, power consumption and area overhead. A need for low-voltage low-power operational amplifiers exists and used for some applications. This paper deals an effective OTA design for good PSRR, low-voltage, low-power and wide output voltage swing operational amplifier. Trying to combine an alte...
متن کاملNovel operational transconductance amplifier based on floating gate MOSFET tunable grounded resistor
The design of tunable operational transconductance amplifier with wide linear range has become increasingly challenging with the scaling in the power supply voltage. Use of control voltage for the purpose of tunning often results in narrow linear range. In recent years the use of voltage as a control parameter has even become more difficult with the reduced supply voltage environment. In this p...
متن کامل