Well Field Three-dimensional Drill String Vibration Signals’ Periodic Vibration Noise Separation Method Research
نویسندگان
چکیده
The effect of periodic vibration noise in wellsite is an important factor which impact analysis on three-dimensional drill string vibration signal. In order to obtain more accurate characters of three-dimensional drill string vibration signal that reflects the drilling tools condition, we conduct researches on the periodic vibration noise in the wellsite, independent component analysis algorithm which based on negative entropy for periodic vibration noise signal separation was adopted. At the same time, in order to improve the effect of algorithm demixing, an improved Particle Swarm Optimization algorithm was introduced, combining with periodic noise components which exist in three directions of drill string vibration signals to seek the optimal mixed matrix by which can structure multi-channel mixed-signal of independent component analysis algorithm. This method has high similarity after separation each signal components, in operation has high efficiency. Through the experimental simulation, the method was proven feasible in the drill string vibration periodic noise signal separation.
منابع مشابه
Drill string Vibration Modeling Including Coupling Effects
Abstract: The governing equations of motion for a drill string considering coupling between axial, lateral and torsional vibrations are obtained using a Lagrangian approach. The result leads to a set of non-linear equations with time varying coefficients. A fully coupled model for axial, lateral, and torsional vibrations of drill strings is presented. The bit/formation interactions are assumed ...
متن کاملGap element method of longitudinal vibration of drill string
Due to the lower tool as the research object to analyze the vibration of the drill string, causes the loss of the low order natural frequency of the drill string and the inherent vibration mode, give rise to the distortion and error of the result from the transient analysis of the drill string. For this purpose, the whole drill string of the deep wells is studied in the article, build the mecha...
متن کاملModeling of wave propagation in drill strings using vibration transfer matrix methods.
In order to understand critical vibration of a drill bit such as stick-slip and bit-bounce and their wave propagation characteristics through a drill string system, it is critical to model the torsional, longitudinal, and flexural waves generated by the drill bit vibration. Here, a modeling method based on a vibration transfer matrix between two sets of structural wave variables at the ends of ...
متن کاملStudy on Storable Down-hole Drilling String Vibration Testing System
Drilling engineering is a high input and risk underground project, which needs the real-time down-hole diagnosis and forecast technique. Drilling string vibration signals contain full and complex vibration waves, which contains the vibration of the drilling string by itself, the vibration stimulated by the interaction of bit and the formation, the vibration induced by colliding between drill st...
متن کاملRock drills used in South African mines: a comparative study of noise and vibration levels.
OBJECTIVES To compare the noise and vibration levels associated with three hand-held rock drills (pneumatic, hydraulic and electric) currently used in South African mines, and a prototype acoustically shielded self-propelled rock drill. METHODS Equivalent A-weighted sound pressure levels were recorded on a geometrical grid, using Rion NL-11 and NL-14 sound level meters. Vibration measurements...
متن کامل