Estimation of Infiltration Parameters and the Irrigation Coefficients with the Surface Irrigation Advance Distance
نویسندگان
چکیده
A theory based on Manning roughness equation, Philip equation and water balance equation was developed which only employed the advance distance in the calculation of the infiltration parameters and irrigation coefficients in both the border irrigation and the surge irrigation. The improved procedure was validated with both the border irrigation and surge irrigation experiments. The main results are shown as follows. Infiltration parameters of the Philip equation could be calculated accurately only using water advance distance in the irrigation process comparing to the experimental data. With the calculated parameters and the water balance equation, the irrigation coefficients were also estimated. The water advance velocity should be measured at about 0.5 m to 1.0 m far from the water advance in the experimental corn fields.
منابع مشابه
The Investigation of the Estimation Precision of Infiltration Equation Parameters Based on Soil Physics Characteristics for Furrow Irrigation
Furrow irrigation is the most common method of surface irrigation. However, the accurate estimation of the soil water infiltration equation is the most important challenge for evaluating this method of irrigation. In this study, a fast and simple method that is named soil intake families and presented by USDA-NRCS (RSIF), evaluated for estimation of the Kostiakove-lewis infiltration equation pa...
متن کاملComparison of Two-point and Two-Time Methods for Estimating the Infiltration Parameters in Meandering Furrow Irrigation
Infiltration is the most important characteristic in the design and management of any surface irrigation system. Since the hydraulic of flow in meandering furrows is different from the standard furrows, the accuracy of infiltration function parameter estimation methods should be examined for the optimal design and management of meandering furrow irrigation. The main objective of this study was ...
متن کاملارزیابی و مقایسه روش‌های مختلف تخمین پارامترهای نفوذ در سیستم‌های مختلف آبیاری جویچه‌ای و رژیم‌های مختلف جریان ورودی
In this study, two different approaches of infiltration parameters estimation in traditional, variable and fixed alternate furrow irrigation, with and without cutback inflow, were performed and compared. Four usual methods including two-point (Elliott and Walker), Valiantzas one-point, Mailapalli one-point and Rodriguez and Martos optimization methods, as approaches based on advance data, and m...
متن کاملComparison of One-point and Two-point Methods for Estimation of Infiltration Parameters in Furrow Irrigation
Infiltration is one of the most important hydraulic parameters affecting surface irrigation and one ofthe most difficult parameters in practical field determinations. The infiltration equations are used todescribe water flow hydraulics and surface irrigation systems design. But determination of theparameters in these equations are costly and time consuming. Therefore, some estimating methods ar...
متن کاملارزیابی دقت روش USDA-NRCS اصلاح‌شده در برآورد غیر‌مستقیم پارامترهای معادله نفوذ (مطالعه موردی آبیاری جویچه‌ای مزارع کشت و صنعت امیرکبیر)
Infiltration is the most crucial process affecting surface irrigation uniformity and efficiency as it is the mechanism that transfers and distributes water from the surface to the soil profile. As a direct method of infiltration measurement, the volume balance method requires time, accuracy and high costs. Moreover, before the land preparation and at the research phase the use of this method is...
متن کامل