Grid Interface of a Pmsg Based Wind Energy Conversion System with Power Quality Improvement Features
نویسندگان
چکیده
Renewable Energy Sources are nowadays rapidly growing popularity at the distribution level which employs power electronic converters, which ensures reliable operation to customers. Among the RES, wind energy is now firmly established as a mature technology for electricity generation. This paper discusses the role of ac/dc/ac power converter for grid interface of wind energy. The generator side converter incorporates the maximum power point tracking algorithm to extract maximum energy from wind turbine system. The grid side converter plays a dual role of interfacing the wind energy to grid as well as to supply reactive power as demanded by the non-linear load connected at the PCC. A simple model of the proposed system is developed and simulated in MATLAB environment. The effectiveness of the system is validated through extensive simulation results.
منابع مشابه
A New DPC-SVM for Matrix Converter Used in Wind Energy Conversion System Based on Multiphase Permanent Magnet Synchronous Generator
This paper proposes a novel wind energy conversion system based on a Five-phase Permanent Magnetic Synchronous Generator (5-PMSG) and a Five to three Matrix Converter (5-3MC). The low cost and volume and also eliminating grid side converter controller are attractive aspects of the proposed topology compared to the conventional with back-to-back converters. The control of active and reactive pow...
متن کاملImprovement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller
One of the main problems in wind energy conversion system (WECS) is how to achieve maximum output power in different wind speeds. Maximum methods for maximum power point tracking in wind energy conversion systems require the knowledge of system characteristics and mechanic sensors. So, using these methods practically will follow with high price and an abundant difficulties. In this pape...
متن کاملImprovement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller
One of the main problems in wind energy conversion system (WECS) is how to achieve maximum output power in different wind speeds. Maximum methods for maximum power point tracking in wind energy conversion systems require the knowledge of system characteristics and mechanic sensors. So, using these methods practically will follow with high price and an abundant difficulties. In this pape...
متن کاملOptimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System
In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...
متن کاملA Comparative Power Quality Study of DFIG and PMSG Based Wind Energy Conversion System
Wind Energy Generation Systems (WECS) are confronted with increasing demands for power quality and harmonic distortion control. With the advances in power electronics technology, the rapid growth of variable speed WECS is now witnessed. However, the power quality still remains an important issue to be addressed thoroughly by researchers. This paper presents a comparative study on grid connected...
متن کامل