Modeling and Control Analysis of Wind Turbine of Two Bladed and Three Bladed Wind Turbine Systems
نویسنده
چکیده
The wind power industries arepresently the fastest raising renewable energy sector throughout the world compare to other sourses. the main aim of this paper is to develop the mathematical model and implemented in simulations for torque control of two bladed and three bladed wind turbine, by changing coefficient of power, tip speed ratio and pitch angle values for different wind speeds.To ensure that an economically competitive wind power making, the trend as to increase the turbine size and while at the same time minimize material usage. Main aim of the paper two cases are developed one for two bladed wind turbine system and another for the three bladed wind turbine system and compared the simulation results of both cases. Finally two balade and three blade systems are mathematically developed and implemented in matlabsimulink.
منابع مشابه
Application of guide blades for improving performance of savonius wind turbine
Application of guide blades is an appropriate method for improving aerodynamic performance of savonius wind turbine. Guide blades gather the wind energy around the turbine and guide them into the concave side of savonius rotor. In this paper, numerical investigation is conducted for evaluating effect of the guide blades on the performance of savonius turbine. Aerodynamic performance of the turb...
متن کاملExperimental wind tunnel testing of linear individual pitch control for two-bladed wind turbines
In this paper Linear Individual Pitch Control (LIPC) is applied to an experimental small-scale two-bladed wind turbine. LIPC is a recently introduced Individual Pitch Control (IPC) strategy specifically intended for two-bladed wind turbines. The LIPC approach is based on a linear coordinate transformation, with the special property that only two control loops are required to potentially reduce ...
متن کاملAerodynamic Optimal Design of Wind Turbine Blades using Genetic Algorithm
Wind power has been widely considered and utilized in recent years as one of the most promising renewable energy sources. In the current research study, aerodynamic analysis of the upwind three-bladed horizontal axis turbine is carried out using blade element momentum theory (BEM), and a genetic algorithm (GA) is applied as an optimization method. Output power generation is considered as an obj...
متن کاملAerodynamic optimal design of wind turbine blades using genetic algorithm
Wind power has been widely considered and utilized in recent years as one of the most promising renewable energy sources. In the current research study, aerodynamic analysis of the upwind three-bladed horizontal axis turbine is carried out using blade element momentum theory (BEM), and a genetic algorithm (GA) is applied as an optimization method. Output power generation is considered as an...
متن کاملFixed-structure H∞ control design for linear Individual Pitch Control of two-bladed wind turbines
In this paper, a fixed-structure Individual Pitch Control (IPC) design method for two-bladed wind turbines is presented. IPC is an active load reduction technique designed to lower wind turbine loads, which are caused by continuously varying wind conditions. Based on load measurements, the once-per-revolution (1P) loads and harmonics of this frequency (2P, 3P, etc.) can be reduced by rotating (...
متن کامل