Structural Damage Detection Using Time Windowing Technique from Measured Acceleration during Earthquake
نویسندگان
چکیده
This paper presents a system identification (SI) scheme in time domain using measured acceleration data. The error function is defined as the time integral of the least square errors between the measured acceleration and the calculated acceleration by a mathematical model. Damping parameters as well as stiffness properties of a structure are considered as system parameters. The structural damping is modeled by the Rayleigh damping. A new regularization function defined by the L1-norm of the first derivative of system parameters with respect to time is proposed to alleviate the ill-posed characteristics of inverse problems and to accommodate discontinuities of system parameters in time. The time window concept is proposed to trace variation of system parameters in time. Numerical simulation study is performed through a two-span continuous truss subject to ground motion.
منابع مشابه
Effect of the frequency content of earthquake excitation on damage detection in steel frames
In this study, the effect of earthquake frequency content and noise effects on damage detection has been investigated. For this purpose, the damage was defined as nonlinear behavior of beams and columns, and several ground motion records were scaled so that some elements yield under the applied excitation. Then the acceleration response data of each floor obtained using the nonlinear dynamic an...
متن کاملDAMAGE DETECTION IN THIN PLATES USING A GRADIENT-BASED SECOND-ORDER NUMERICAL OPTIMIZATION TECHNIQUE
The purpose of the present study is the damage detection in the thin plates in terms of the wide application of such structures in various branches of engineering such as structural, mechanical, aerospace, shipbuilding, etc. using gradient-based second-order numerical optimization techniques. The technique used for optimization in this study is the second-order Levenberg-Marquardt algorithm (SO...
متن کاملCurvature Method to Detect Location and Depth of a Plastic Zone in Frame Members during an Earthquake
This paper presents a new method for detecting beam and frame damage caused by an earthquake. Despite comprehensive investigations on structural damage detection, which mostly have focused on damage detection of elastic structures, the present study deals with nonlinear damage detection in structures. Furthermore, in the proposed method, only measurements of the damaged structures during an ear...
متن کاملQuick earthquake damage detection method for bridge structures
When an extreme earthquake occurs, it is essential to detect the severe structural damage that affect the structural safety immediately. This paper proposes a method for quick earthquake damage detection/evaluation of reinforced concrete bridge columns. An intelligent sensor unit is developed that captures changes in the natural period of a bridge column by FFT of response acceleration recorded...
متن کاملComparison of Seismic Input Energy Based on the Characteristics of Structural Hysteretic Behavior
The variation of earthquake input energy with characteristics of various structural systems, particularly in hysteretic states, has not been studied to such extent that creates enough con-fidence for proposing energy-based design criteria. In this paper, at first, based on a somehow new insight into the concept of earthquake input energy, two concepts of ‘Received Energy’ (ERec) and ‘Returned E...
متن کامل